other

Your basic 7-segment LED. Common anode. Two decimal points, but only the one on the right is wired. Digit height is 0.6". Overall height is 1". Resources Datasheet Arduino Library (Thanks...

Description 1. The Sound Detector is based on a microphone and a power amplifier. It can be used for detecting the sound strength of the environment. 2. This sound sensor gets signal by both digital...

Continuous beep - Breadboard friendly!

Diameter:5mm Model: 5549 Light Resistance 45-140KO Dark resistance 10MO

They come in 5 meter reels with a 3-pin JST SM connector on each end and separated power/ground wires and different color wires than show in the image. These strips are sold by the meter! If you...

24C32 32K I2C EEPROM Memor DS1307 based RTC with LIR2032 battery (Battery not included) Backup by AT24C32 32Kbit DS1307,AT24C32 can work separated Leads to the DS1307 clock pin, to provide the clock...

  One Terminal Strip, Tie-point 25. Material: ABS plastic Completely reusable. Accepts a variety of wire sizes (29-20 AWG)...

Various flame, fire detection, relay output, which can be accessed 220V high current electrical equipment Module Features: 1, can detect the flame or the wavelength at 760 nm to 1100 nm range of...

Connect your prototype circuit to the Arduino easily with this simple to use Arduino shield. It includes a mini-breadboard with self-adhesive backing so you can stick this onto the shield and use it...

Operating Voltage : 5V(DC) Static Current: Less than 2mA. Output Signal: Electric frequency signal, high level 5V, low level 0V. Sensor Angle: Not more than 15 degrees Detection Distance: 2cm-450cm...

40 pin cable, 30cm in length. Cable type: female-female

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on...

Working voltage: DC5V-20V Quiescent Current: 65uA Level Output Voltage: High 3V / Low 0V Delaying time: 0.3~18s (adjustable) Blockade Time: 0.2s Trigger Method: L: unrepeatable trigger / H:...

Current Limiting resistor IMΩ +/- 5% Electro-scattering time 0.1 sec Safe and reliable Adjustable at will Rinsing resisting Suitable for use in clean rooms

This inexpensive USB to RS232 cable works well for Linux and Windows 7 environments, but is not currently functioning with Windows 10. Suitable for link download Simple and easy way to give USB...

This is a digital temperature and humidity sensor module that works with all of the Arduino micro-controllers. Because it is a digital sensor it only necessitates 3 connections, Vcc, GND, and a...

This is a very popular LCD for the Arduino or Freeduino board. It includes a 2×16 LCD display which is backlit in blue. It uses the I2C communications protocol so it is compatible with any...

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals...