Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want to make a sound play whenever you press a button. What about something that has to be very...

Listen up! This high power 4" diameter speaker will amp up any audio project where you need loud sound! It is 4 ohm impedance, rated for 20W continuous power. (This thing is really loud) It also has four handy mounting tabs 3 inches apart, and a grill...

Pump out some mini beats with Pirate Audio Speaker! This diminutive sound system has an I2S DAC, amp, mini mono speaker, high-res display, and playback control buttons. Pirate Audio Speaker is perfect for making a...

Allo - Set of DC 5.5 X 2.1mm Adapters Allo Nirvana & Shanti replacement adapters. Content 1 X DC 5.5 X 2.1mm Input to 5.5 X 2.5mm Output 1 X DC 5.5 X 2.1mm Input to 4.0 X 1.7mm Output 1 X DC 5.5 X 2.1mm Input to 4.8 X 1.7mm...

Audio Codec HAT is a low power, high quality stereo CODEC designed for portable digital audio applications which is based on WM8960 IC that have the advantages like Low leakage, excellent PSRR and pop/click suppression mechanisms which allow direct...

This new Digi2 is a revised version of our Digi+ model which is compatible with both the Pi4 rev. 1.5 and backwards.  Our new design features a second GPIO header that accommodates our add-on boards and has all the same features as our original...

Power supply is not included The HiFiBerry AMP100 has been designed with more demanding speaker loads in mind. Just as with our other products, this new model features an improved signal path based on our DAC2 Pro section, but benefits from higher power...

A super-simple, slimline way to hook up a hi-fi amp or powered speakers to your Raspberry Pi! Output punchy digital I2S audio whilst leaving your GPIO pins conveniently accessible. SHIM is a old Yorkshire term meaning 'Shove Hardware In Middle' - we use...

XLR daughter card for IQaudio DAC Pro. 

The HiFi AMP Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ through the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering required. Easy to get more beautiful and fantastic sound by...

InnoMaker HiFi DAC Audio Hat for Raspberry Pi The HiFi DAC Hat compatible with Raspberry Pi Zero, Zero W, 3B, 3B+, Pi 4 with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get...

Give your Apple iPod Hi-Fi speaker system new life with the Airplay Audio Streaming Adapter. No wires needed, the adapter plugs right into the dock connector.  The adapter powers a Raspberry Pi Zero W that digitally sends the audio signal to a high...

Power Supply 19V 3.4A, 65W - 5.5mmx2.5mmx12mm Barrel - For IQaudio DigiAMP+This high quality power adapter delivers a stable 19V @3.4A and features a 5.5 mm x 2.5 mm barrel connector making it perfect for the IQaudio DigiAMP+...

Waveshare 14595 - 8Ω 5W SpeakerA set of speakers designed for specific Waveshare displays. The mounting holes will make them easy to integrate in your setup! Compatibility Waveshare 5inch HDMI LCD (G) Display, 800x480,...

IQaudio Codec Zero is a Raspberry Pi Zero-sized audio I/O HAT. It delivers bi-directional digital audio signals (I2S) between Raspberry Pi Zero and its onboard Dialog Semiconductor DA7212 codec. Codec Zero supports a range of input and output devices,...

Compatible with: Raspberry Pi A+/B+/2B/3B/3B+/4B+/Zero This is HiFiBerry DAC2 Pro with a pair of gold-plated RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering. HiFiBerry DAC2 Pro is the sucessor of your popular DAC+ Pro...

Note: There are currently no cases available that fit the IQaudio boards. The Pi-DAC PRO, a new breed of audiophile DAC for the Raspberry Pi! With Phono (RCA), Heaphone (3.5mm) and support for Balanced / Differential output (for XLR use in...

Raspberry Pi DAC+ is a high-performance audio HAT compatible with any Raspberry Pi computer that has a 40-pin GPIO header. With the Texas Instruments PCM5122, it delivers stereo analogue audio to a pair of phono (RCA) connectors. It does not require...

IQaudio DigiAMP+ IQaudio DigiAMP+ uses the Texas Instruments TAS5756M PowerDAC to deliver direct connection to PASSIVE stereo speakers at up to 2x35wpc with variable output. Ideal for a Raspberry Pi-based hi-fi system. Getting started IQaudio DigiAMP+...

The ultimate hackable headphone amp for your desk! Pirate Audio Headphone Amp for Raspberry Pi has an I2S DAC, headphone amplifier, high-res display, and playback control buttons. Build your own home-brew iPod Nano with Pirate...