External LTE-M Antenna Kit for use with the FiPy and GPy development boards. Specification Frequency: 703~803/2520~2620(MHz) Antenna size: 75 x 21 (mm) PCB 0.6 mm LTE Low bands (5, 8, 12, 13, 18, 19, 20, 28) Tx frequencies 699...

This universal LoRa & Sigfox Antenna Kit can be used with the LoPy, SiPy, LoPy4 and FiPy IoT Development boards. The LoRa & Sigfox Antenna Kit Includes External antenna. RF Cable Assemblies RP-SMA (Female) JK-IPEX MHF U.FL 1.13 100MM RP-SMA...

UPGRADED CALIBRATION AND EXTENDED BANDS The GPy is our Micropython-programmable triple bearer. Different from its SiPy counterpart, the GPy offers WiFI, BLE and cellular CAT-M1/NB1. Create and connect your things everwhere. **IMPORTANT NOTE: As of...

Five networks in one small board; the Micropython-programmable FiPy takes up the same footprint as our other boards. Featuring WiFi, Bluetooth, LoRa, Sigfox and dual LTE-M (CAT-M1 and NB-IoT), the FiPy gives access to global LPWAN networks. NOTE: The LTE...

Meet our new Pygate case. It will fit your Pygate in perfectly. It’s a translucent smokey colour, made from a polycarbonate material. Pygate is an 8-channel LoRaWAN gateway. Connect your WiPy 3...

Pygate is an 8-channel LoRaWAN gateway. Connect your WiPy 3.0, LoPy4 and GPy and hook up any other Pycom devices and voila – a decentralised IoT network. NOTE: Just add a WiPy, LoPy4 or GPy to provide the processing capabilities as well as the...

Pysense 2.0 X is a new sensor shield which can be used with any Pycom multi-network modules. It fits with all Pycom boards and contains a number of sensors, such as ambient light, pressure and humidity. It’s got a ton of new features including a 6...

SPRESENSE is a low-power board computer for the IoT that is equipped with a GPS receiver and supports High-Resolution Audio codecs. The board allows for IoT versatility and can be developed for a vast range of uses, such as a drone utilizing the GPS...

Features: On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver. On board then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring. All pins of chip have been lead to can be...

Aww yeah, it's the Feather you have been waiting for, this time with pre-assembled headers! The HUZZAH32 is Adafruit's ESP32-based Feather, made with the official WROOM32 module. They packed everything you love about Feathers: built in...

In collaboration with Google and Mongoose OS, Adafruit's releasing an IoT Core Pack based around their Feather HUZZAH32! This kit includes a pre-soldered Adafruit Feather HUZZAH with ESP32 WiFi and some sensors and components to get...

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with...

XBee and XBee-PRO ZigBee RF modules provide cost effective wireless connectivity to electronic devices. They are interoperable with other ZigBee PRO feature set devices, including devices from other vendors. XBee and XBee-PRO ZigBee modules are ideal for...

This product includes ONLY one CC2530 module, while at least two CC2530 modules are required to setup a ZigBee network. Overview Core2530 is a ZigBee module based on CC2530F256, and the extension interface is compatible with XBee. Basically...

Product Description The NodeMcu is an open-source development kit based on the popular chip ESP8266 (ESP-12E), using the Lua programming language, a development environment for applications that provide fast Wi-Fi connectivity. The ESP8266 is a...

ESP-201 ESP8266 Serial Port Module Send Receive IO Lead Out WIFI Wireless Product Description 1.Can be used as the IO module. 2.All IO lead out. 3.With antenna, farther than others. 4.IPX interface on board. 5.Low consumption, and more cheaper. 6...

The Microsoft Internet of Things Pack for Raspberry Pi 3 is the best way to get started using Windows 10 and your Raspberry Pi as an IoT enabled device. A collaboration between Microsoft's IoT division and Adafruit, this pack's the best way to...

The Protoneer RPI CNC Board combines a real-time CNC controller (Micro-controller running GRBL) with a powerful credit card size computer - a Raspberry Pi! By connecting the two systems, the CNC board created an ecosystem where the Raspberry Pi...

Locate your stuff! The Asset Tracker Kit contains all of the pieces you need to build a GSM + GPS location tracker for your most prized possessions. In addition to a GPS Shield, the Asset Tracker Kit comes with a weatherproof enclosure, so it’ll...

Say goodbye to hazardous high voltage wiring and create the Internet of Things with safe, reliable power control. The IoT Power Relay from Digital Loggers is custom designed to fit your every need when developing projects...