Motors

Waveshare 15024 - MG90S Micro Servo, Metal Gear - MG90S Servo The Waveshare MG90S 9g Micro Servo Motor delivers reliable torque in a compact design. Built with durable metal gears, it ensures longer life and stable movement compared to...

ELECFREAKS 360 Digital Servo With Wheel And Tire (EF90D) with wheel and tire is a kind of 360 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and uses pulse width to adjust the speed of the servo...

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10...

90 degree Plastic Gear Motor with wheel for your 2WD or 4WD robot cars. Specifications Voltage: DC 3V-6V Current: 100 MA-120MA Reduction rate:  48: 1 RPM (With tire): 100-240 Tire Diameter: 65mm Car Speed (M/minute): 20-48 Motor Weight...

This is a great general purpose-actuator for tiny mechanisms. The FS90 offers positive control over a 120 degree angle. Operating angle controlled by standard servo pulses between 900us and 2100us. Has a three wire connector for the power,...

This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as our micro servo (like the FS90, FS90R, SG92R) but it isn't a servo. It's more like a DC motor + plastic gear-train in a box. It's not a...

Waveshare 15299 - MG996R Servo, Metal Gear, High Torque Product: MG996R Servo Torque: 9kg/cm(4.8V), 11kg/cm(6V) Speed: 0.19s/60°(4.8V), 0.18s/60°(6V) Rotate angle: 180° Operating voltage: 4.8 ~ 6V Gear: metal Dead band:...

Stepper motors are great motors for position control. They can be found in desktop printers, plotters, 3d printers, CNC milling machines, and anything else requiring precise position control. Steppers are a special segment of brushless motors. They are...

A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit...

Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make...

Weight : 9 g Size : 22 x 11.5 x 27 mm Operating Speed (4.8V no load): 0.12sec/60 degrees Stall Torque (4.8V): 17.5oz/in (1.2 kg/cm) Temperature Range: -30 to +60 Degree C Dead Band Width: 7usec Operating Voltage:3.0-7.2 Volts