Hakko

Tool for a flush cut. One of the most popular cutting tool is now available with pink grip handles. Micro Cutter Tool for a flush cut with very sharp cutting edges Cutting Force: 5 kg Max Cut:...

FX-888DX Soldering Station, Classic Blue/Yellow, FX888DX-010BYFeatures Adjustable temperature control dial, range: 120° - 899°F Digital display shows °F or °C Ceramic...

Hakko - FX-901 Cordless Soldering Iron - FX-901/PFeatures ON / OFF switch Quick-change composite tip Maintains soldering temperature of 600° F Separate battery magazine for easy replacement...

WIRE STRIPPER / SHEAR / PLIER COMBOVery strong multi-use tool. It can be used as: Shears, Multi-diameter Wire stripper, pliers. Features Multi-function Wire stripper shear and pliers. The...

The PN-2006 is a smooth, pointed long nose pliers ideal to be used in difficult to reach areas. For delicate work in tight areas 32mm long jaw with 1.2mm nose Nose: Pointed Jaws:...

The Hakko C1390C Omnivise holds boards easily, safely, and securely. The unique design allows 360° use and can adjust to five different height settings. Can accommodate any board size. The...

Hakko ESD Grey Rubber Mat 24 x 16in - SC-1003/P Made from all natural rubber with a conductive bottom layer and dissipative top layer. Surface is a smooth, mat surface that is easy to clean and...

Smooth pointed short nose pliers, specially designed for delicate work in electronics.  Thin, short pliers for very delicate work 12mm long jaw with 1mm nose Nose Pointed Jaws:...

The PN-2007 is a serrated, flat long nose pliers ideal to be used in difficult to reach areas. For delicate work in tight areas 32mm long jaw with 3.0mm nose Nose Flat Jaws: Serrated Outside...

This tip is used with the following Hakko Soldering Stations and Systems: Hakko FX-888 Soldering Station Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System) Hakko 907...

Hakko CHP-170 Flush-Cut Micro Cutter - 16AWG One of the most popular cutting tool for a flush cut! Features Cutting Force: 5 kg Max Cut: 16 AWG copper wire Rockwell Hardness (RHC):...

A protective cap for the HAKKO FX-600/601 soldering irons. NOTE: While the plastic is heat resistant, it is not intended to be used as a holder or installed while the soldering iron is on. Heat from...

This tip is used with the following Hakko Soldering Stations and Systems: Hakko FX-888 Soldering Station Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System) Hakko 907...

Increase work efficiency and organize your bench with Hakko 611 solder reel stands. Draw solder wire as you need with smooth reeling action. Dual reels offers the flexibility to use different wire...

Hakko Iron Cover 605M - One piece The 605M iron cover provides heat resistance and thermal insulation for your soldering iron, allowing you to place it back into your tool box immediately after use...

The Hakko PD-03-D manual desoldering tool provides a low cost and effective method for removal of residual solder during desoldering operations. With the press of a button, the spring activated...

TIP POLISHING PASTE The Hakko FS-100 paste re-tins oxidized soldering iron tips and is 100% Lead-Free. The flux does not contain Diammonium phosphate and does not leave a corrosive residue...

SOLDERING IRON HOLDER with 599B TIP CLEANER - 633-01 Comes with Hakko 599B tip cleaner (clean your tip without water!) For use with the Hakko FX-600 • FX-601 • FX-650 • FR-300...

A lightweight portable soldering iron with a lock out temperature key. A perfect 74W iron for the DIY hobbyist that uses T18 tips. Over 30 different tip shapes at a temperature range from...

Features T31 Series Composite Tip This tip is used with the Hakko FX-100 Induction Heat Soldering System Use with the Hakko FX1001-51 soldering iron. Temperature: 750°F...