This ATX Bracket Set is included in PiKVM V4 products, but is an accessory for PiKVM V3. Use the ATX Bracket Set for PiKVM to mount the ATX Control Board (sold separately) in the PC case. The set includes both standard and low-profile PCIe brackets and...

NOTE - USB functionality such as KVM switching is only supported on the PiKVM V4 Plus. Unsure which PiKVM V4 model to choose? See our comparison chart Please note that USB-C displays are not supported. PiKVM V4 Plus The next generation of Raspberry Pi...

NOTE - USB functionality such as KVM switching is only supported on the PiKVM V4 Plus. Unsure which PiKVM V4 model to choose? See our comparison chart Please note that USB-C displays are not supported. PiKVM V4 Mini The next generation of Raspberry Pi...

Raspberry Pi Pico is NOT included Give your Raspberry Pi Pico project the capacity to chat with 2.4GHz Wi-Fi networks plus a handy microSD card slot! Pico Wireless Pack attaches to the back of your Pico and uses an ESP32 chip to let your Pico connect to...

Add both WiFi and Bluetooth capability to your computer super fast with this USB Bluetooth / WiFi Dongle! This little two-faced cutie is so versatile! Its WiFi half can be used to make Internet of Things devices cable-free or we also love to take...

Waveshare 20182 - ESP8266 WiFi Module For Raspberry Pi Pico, Supports TCP/UDP Protocol Features The Pico-ESP8266 is a WiFi expansion module designed for Raspberry Pi Pico, which can be controlled via UART AT command, and supports TCP/UDP communication...

Waveshare 20472 - USB 3.2 Gen1 And Gigabit Ethernet HUB HAT For Raspberry Pi, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free This is a driver-free 3 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, also with a Gigabit Ethernet port, provides more...

Waveshare 20410 - Ethernet To UART Converter For Raspberry Pi Pico, 10/100M Ethernet, Enabling Network Communication Through UARTSupports 2-CH Ethernet To UART Data Transparent Transmission Features Standard Raspberry Pi Pico header, supports...

This steel case loaded with extra features will allow you to build a full solution based on the PiKVM HAT and a Raspberry Pi 4 board. Features Steel enclosure High quality steel with cool...

This adapter requires installation of a third-party driver. Although it is relatively simple, PLEASE READ THE INSTALLATION INSTRUCTIONS and ensure you are comfortable following them before buying this adapter. Updating the kernel requires...

The Duo Pi Blade Rack is a compact cluster server built using ten Duo Pi boards (mounted in a pair of Duo Pi Blade Packs) which can power and mount up to twenty Raspberry Pi without complicated power wiring. It's...

This low cost XBee USB Adapter Board comes in partially assembled kit form and provides a cost-effective solution to interfacing a PC or microcontroller to any XBee or XBee Pro module. The PC connection can be used to configure the XBee Module through...

Dual channel BNC adapter for BitScope Micro. Includes 6 logic inputs and switchable waveform and clock generator outputs. MP01A is a dual channel BNC adapter for BitScope Micro. It allows the use of industry standard oscilloscope...

Cat6 Ethernet Patch Cable - Snagless RJ45, Stranded, 550Mhz, UTP, Pure Bare Copper Wire, 24AWG, 7ft, Black Save the time and hassle of building Ethernet cables by using these fixed-length UTP Cat6 Ethernet Network Cables! Features Unshielded Twisted...

CLEARANCE - The compact 5 port Gigabit Ethernet switch is NOT included and needs to be purchased separately. The BitScope Blade Rack is a 1RU server built with Quattro Pi. It is populated with up to four Raspberry Pi and...

This product includes ONLY one CC2530 module, while at least two CC2530 modules are required to setup a ZigBee network. Overview Core2530 is a ZigBee module based on CC2530F256, and the extension interface is compatible with XBee. Basically...

One can never have enough socks, or USB ports. Add some more USB and Ethernet capability to your Raspberry Pi Zero or, really, any kind of tablet or computer with an OTG connector with this USB 2.0 and Ethernet Hub! This handy combo-hub has 3...

Use this antenna to improve your WLAN or Zigbee signal strength. The RP-SMA connector and pivoting design make it easy to attach and orient. Specifications: Frequency Range: 2.4GHz ~ 2.5GHz Antenna Type: Whip, Tilt Number of Bands:  1 VSWR: 1...

One can never have enough socks, or USB ports. Add some more USB and Ethernet capability to your Raspberry Pi or, really, any kind of computer with this USB 2.0 and Ethernet Hub! This handy combo-hub has 3 USB 2.0 ports, and a AX88772A...

Operates in 2.4 GHz frequency bands Frequency: 2.4 GHz, 2.312-2.472 GHz, 2.484 GHz 2x2 MIMO (2T2R) technology improves effective throughput and range over existing 802.11 b/g products Data rates: up to 300Mbps 802.11e-compatible bursting and I standards...