Make a scrolling sign, or a small video display with this 8x8 gridded square Amber LED matrix. Only 1.2" on a side, it is quite visible but not so large it won't plug into a breadboard! 64 Amber LEDs are contained inside the plastic body, in an 8x8...

Make a scrolling sign, or a small video display with this 8x8 gridded pixel white LED matrix. Only 1.2" on a side, it is quite visible but not so large it won't plug into a breadboard! There are 16 pins on the side, 8 on each, with 0.1" spacing so...

Make a scrolling sign, or a small video display with this 8x8 gridded yellow LED matrix. Only 1.2" on a side, it is quite visible but not so large it won't plug into a breadboard! There are 16 pins on the side, 8 on each, with 0.1" spacing so you can...

Waveshare 17953 - 1.54inch Passive NFC-Powered E-Paper, No Battery, Wireless Powering & Data Transfer Specifications Power supply Wireless Grey scale 2 Display color Red / Black / White Refresh time 8s (data...

100 assorted through-hole LEDs: 10x red, 5mm 10x red, 3mm 10x green, 5mm 10x green, 3mm 10x blue, 5mm 10x blue 3mm 10x yellow, 5mm 10x yellow, 3mm 10x white, 5mm 10x white, 3mm

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft...

This gearmotor is a powerful 12V brushed DC motor with a 10:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 640 counts per...

Need to measure something damp? This epoxy-coated precision 1% 10K thermistor is an inexpensive way to measure temperature in weather or liquids. The resistance in 25 °C is 10K (+- 1%). The resistance goes down as it gets warmer and goes up as it...

The Chemical eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with clunky mechanical floats, and easily interfaces with electronic control systems. What separates this...

RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are weatherproof and rugged. There are four flanges molded in so that you can 'push' them...

This 25mm 5MP Lens is compatible with the Raspberry Pi HQ camera. Thanks to its fixed iris and the special optics construction, sharp focus is achievable at a 30cm focal distance and higher with this lens. FEATURES Incredible depth of field...

A ZIF (Zero Insertion Force Socket) allows you to insert and remove chips easily from an existing circuits. These are often used for chip programmers or when you need to test a chip without damaging it. Move the lever up and chips drop right in. Move the...

Waveshare 16565 - 296×128, 2.9inch flexible E-Ink display HAT for Raspberry Pi, black/white dual-color, SPI interface This is a flexible E-Ink display HAT for Raspberry Pi, 2.9inch, 296×128 resolution, with embedded controller,...

3.2 Inch TFT Color LCD Module with Touch Screen 320*240 ILI9341 LCD Touch Screen Panel Features: ILI9341 touch panel controller 3.3v voltage regulator LED Backlight 320x240 Pixel Color: 65536 Standard 16 Bit interface Included: 1Pcs x...

Specifications: Name Laser Engraver Model K3 Material ABS(Acrylonitrile Butadiene Styrene plastic) + Aluminium alloy Color Black + Gold Size 15.2x16.6x14.3cm (6"x6.5"x5.6") Voltage  AC 110-220V Laser...

This gearmotor consists of a low-power, 12 V brushed DC motor combined with a 377.93:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in...

Creality SKU: 6004110003 Strong wind force and low power consumption Wide compatibility with all Creality 3D printers Compatible Model CR-6 SE

Give your 40 pin, 0.5mm pitch, devices a strrrreeeetch with this extension board.  This 40pin FPC extension board has two 40-pin flex connectors, and an extension cable to add ~22cm (20cm cable plus 2cm board)  Each order comes with one board a...

This breakout board is something Adafruit designed in-house to help them work with 'dot-clock' 40-pin TFT displays that require the RGB pixel data to be clocked in continuously. These displays have 40-pin Flex PCB (FPC) cables and often require a boost...

This gearmotor consists of a medium-power, 12 V brushed DC motor combined with a 46.85:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 2248.86 counts per...