Power your Pi with a wide range of (DC) input voltages from 3 to 16V! Wide Input SHIM lets you use a range of different DC power supplies with your Pi, including the ubiquitous 12V barrel jack power supplies. It's super-skinny, so you can solder it...

Waveshare 23285 - Power Over Ethernet HAT (E) For Raspberry Pi 3B+/4B, 802.3af-Compliant - PoE HAT (E) Features The PoE HAT (E) is a mini 802.3af-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small HAT and some...

Waveshare 22850 - PoE UPS Uninterruptible Power Supply Base Board/Mini-Computer Designed For Raspberry Pi Compute Module 4, Gigabit Ethernet, Dual HDMI, Quad USB2.0 - UPS Mini Computer Kit - CM4-POE-UPS-BOX (US) Please note that the battery length...

Guaranteed reboot after shutdown. After a soft shutdown, the power on a Raspberry Pi needs to be toggled to reboot. This is done by pulling the USB power source out or installing an on/off switch. This becomes an issue when a Raspberry Pi is deployed...

Waveshare 20567 - UPS HAT (B) For Raspberry Pi, 5V Uninterruptible Power Supply, 5A High Current, Pogo Pins Connector Features Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the...

Pi4, ClusterHAT, FanSHIM, etc. NOT included. Keep the 3.3v rail alive between reboots. When rebooting a Raspberry Pi 4 the 3.3 volt rail is reset which causes problems for some HATs. 3v3 Sustain fits in between a Raspberry Pi and a HAT/pHAT and provides...

Waveshare 19694 - UPS Module For Raspberry Pi Pico, Uninterruptible Power Supply Raspberry Pi Pico and Li-ion battery are NOT included. SAFETY CAUTIONS Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property...

Official Micro USB Power Supply - White - USThis new single-head micro USB power supply is suitable for use with the Raspberry Pi Zero 2 W, as well as the Raspberry Pi 1/1+/2/3/3+ models, and the original Raspberry Pi Zero and Zero W. Features ...

Raspberry Pi 48W Power Supply for Build HAT - White - US Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO® TechnicTM motors, as...

USB-C Power Supply - 5.1V 3.0A - UL Listed - Black - On/Off Switch - For Raspberry Pi 4/400This is a high quality switching ‘wall wart’ AC to DC 5.1V 3.0A USB-C wall power supply manufactured specifically for projects that require a higher...

This 15W power supply features the USB-C connection found on the Raspberry Pi 4. It provides 3.0A of current, the maximum that the Pi 4 can accept.  SPECIFICATIONS Input power: 120V AC Input plug type: European Standard Power output: 5.1V 3.0A...

When plugged into any source, the PiJuice Zero acts as an Uninterruptible Power Supply (UPS) using intelligent power management to keep your Raspberry Pi Zero going. With an onboard Real-Time Clock (RTC), programmable LEDs and switches, user-friendly...

External Programming Cable OR RPi Serial Console Do I need this cable? No. You can develop code, debug and program the Sleepy Pi or Sleepy Pi 2 from your Raspberry Pi quite happily… …But there are times when you...

Maximise the Battery Life on Your Raspberry Pi Key Features Daughter board for RPi Zero / ZeroW, A+ or B+,Rpi 2 or Rpi3B/3B+ ->Plugs into the RPi GPIO 5.5 – 30V – Power / Battery input Arduino – ATMEGA328P On / Off ...

SPECS: Plug Type: Aus, Euro, US Input Voltage AC: 100V - 240V Output Voltage Nom. 5V Output Current Max: 3A Power Supply Output Type: Fixed Output Connector: USB Micro Cable Length : 45 inch

The Allo Nirvana SMPS was designed to power audio devices with the lowest noise. Two years was spent developing this product, the longest of any Allo product to date! There are 3 types of noise: 1. Differential noise (noise on power lines compared to...

USB-C Power Supply - 5.1V 3.0A - UL Listed - Black - For Raspberry Pi 4B 1GB/2GB/4GBThis is a high quality switching ‘wall wart’ AC to DC 5.1V 3.0A USB-C wall power supply manufactured specifically for projects that require a higher level of...

USB-C Type-C USB Raspberry Pi Power Switch for Raspberry Pi 4 Model BOne Switch On/Off Power with Dramatically Reduces Wear and Tear on Sensitive MicroUSB ConnectorsNo need to pull the cable to restart or reboot your devices, just press the button to...

Tiny-UPS 3.0 – New & Improved Tiny-UPS provides UPS for 5V USB or other power via an external Li-Polymer or Li-Ion battery (batteries are not included). Size and capacity of the battery does not matter to Tiny-UPS. The charge time and run time...

Music and linear power supply have been always a good match. The main problems of LPS is extremely inflated pricing and no data. Using a transformer will not automatically give you a better PSU. Worst is that most of manufacturers include no testing.....