Monk Makes

This board is designed to dock with a BBC micro:bit using the micro:bit's edge connector. The board is a true CO2 sensor that also measures temperature and relative humidity. Features Low power...

This board is designed to interface to a BBC micro:bit through ring connectors. The board is a true CO2 sensor that also measures temperature and relative humidity. Features Low power -- power...

The MonkMakes Amplified Speaker 2 is an easy to use amplified speaker on a circuit board. The board needs a 3.3 to 6V power supply that can be provided by a Raspberry Pi or Arduino. Audio input will...

Plug a servo meter with 5.4mm (0.1 inch) header socket in, and connect croc/alligator clips to the rings, so that you can easily connect a servomotor to a ring-based microcontroller, such as the BBC...

Raspberry Pi Cookbook by Simon Monk (4th edition). O'Reilly Media If you've started to work with Raspberry Pi, you know that Raspberry Pi's capabilities are continually expanding. The fourth edition...

A 4-way MOSFET switch. Perfect for cars, motorhomes, model railways and other low voltage DC projects. The Mosfetti is a 4 channel MOSFET switch designed for maker projects. It is supplied as a PCB...

An LED Bulb for use with microcontrollers. The board is designed to make it super-easy to attach a high brightness bulb to a Raspberry Pi, Pico, Arduino, ESP32 or other microcontroller board. 3V...

A4 (210 x 297mm) squared-grid spiral-bound notebook with watermark breadboards. 158 pages, card covers. The book also includes Microcontroller programming cheat sheet Common circuits and...

A capacitive moisture meter with temperature and relative humidity measurement. Compatible with micro:bit, Raspberry Pi, Arduino, Pico and most microcontroller boards. Monitor soil moisture,...

The MonkMakes Switch for micro:bit is a solid-state (no moving parts) switch that allows an output of a micro:bit to turn things on and off. This board can be used to switch low voltage devices such...

Prototyping board designed for the Raspberry Pi Pico with the Pico pinout marked on the PCB. If you liked our breadboard for Pico and are ready to take your prototype to solder, you will love this...

An electronics kit for your BBC micro:bit 2. Build 7 great projects. Requires micro:bit V2 Build 7 great projects: Lighthouse Movement Alarm Color Mixer Anemometer Fan Speed Controller Clap...

Programming the Pico (SECOND EDITION) Now updated with a new chapter on the Pico W, this book will teach you Python programming and some basic electronics without assuming any prior knowledge of...

This low-cost simple to use electronics kit will teach you electronics and coding with your Raspberry Pi Pico. Build ten great projects including: A touch switch, a thermometer, a light meter and...

Works with Micro:bit v1 and v2. The MonkMakes Slider for micro:bit allows you to interact with your micro:bit by sliding a control left and right. The board uses a 10kΩ linear variable...

Works with Micro:bit v1 and v2. The MonkMakes Connector for micro:bit makes it super-easy to connect I2C, SPI and other devices to your micro:bit without losing the main connector rings. Unlike...

The MonkMakes Solar Experimenters Kit for micro:bit is a project kit that allows you to experiment with harvesting energy from the sun and other light sources. It consists of a solar panel to harvest...

Click Me to Download the Instructions for this kit. The Servo Kit for micro:bit makes it easy to connect up three servomotors from your micro:bit. Not only that, but the kit also comes with three...

The MonkMakes Power for micro:bit opens up lots of ways of powering your micro:bit. This tiny board has a standard DC barrel jack socket at one end and provides a regulated 3.3V output that you can...

The MonkMakes Servo for micro:bit provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a power supply or battery pack to provide 5 or 6V to the...