Hakko ESD Grey Rubber Mat 24 x 16in - SC-1003/P Made from all natural rubber with a conductive bottom layer and dissipative top layer. Surface is a smooth, mat surface that is easy to clean and reduces glare, and features a non-skid backing. The...

This tip is used with the following Hakko Soldering Stations and Systems: Hakko FX-888 Soldering Station Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System) Hakko 907 Soldering Iron Hakko 907-ESD Soldering Iron Hakko 900M...

A protective cap for the HAKKO FX-600/601 soldering irons. NOTE: While the plastic is heat resistant, it is not intended to be used as a holder or installed while the soldering iron is on. Heat from the soldering iron will cause the cap to increase in...

Lead-Free / RoHS 3 Compliant / REACH Compliant Solder Tip Tinner / Cleaner (lead free). How to use Chip Quik Tip Tinner / Cleaner Turn soldering iron on to normal working temperature, hot enough to melt SAC305 (Sn96.5/Ag3.0/Cu0.5) or Tin/Copper (Sn99...

Lead-Free / RoHS 3 Compliant / REACH Compliant 5 ft of 1.5mm solder wick desoldering braid- No Clean (#2 Yellow) Product Highlights No Clean Solder Wick Use to remove excess solder and solder bridges / short circuits between pins Specifications Braid...

Leaded Solder Wire 63/37 Tin/Lead no-clean water-washable .031 1lb. PRODUCT HIGHLIGHTS No-Clean Water-Washable Synthetic Flux Core The clear, non-corrosive, non-conductive residue is meant to be left on the board. Residues that do remain are water...

Leaded Solder Wire 63/37 Tin/Lead no-clean water-washable .031 2oz. Product Highlights No-Clean Water-Washable Synthetic Flux Core The clear, non-corrosive, non-conductive residue is meant to be left on the board. Residues that do remain are water...

Leaded Solder Wire Pocket Pack 63/37 Tin/Lead no-clean water-washable .031 .7oz. Product Highlights No-Clean Water-Washable Synthetic Flux Core The clear, non-corrosive, non-conductive residue is meant to be left on the board. Residues that do remain...

Lead-Free / RoHS 3 Compliant / REACH Compliant Low viscosity no-clean water-washable synthetic paste flux. Has a pleasant odor. Specifications Flux Type: Synthetic No-Clean Water-Washable (for Leaded and Lead-Free applications) Flux Classification: REL0...

Lead-Free / RoHS 3 Compliant / REACH Compliant Flux Type: No-Clean Liquid Flux (for Leaded and Lead-Free applications) VOC Content: VOC Free Specific Gravity: 1.01 Flux Classification: ORL0 Packaging: Pen 10ml Shelf Life Refrigerated >24 months,...

Silicone Soldering Mat, Heat Resistant, 38 x 21 cm, Blue Features Multifunction Silicone Mat - Assemble, repair, and solder your projects safely. Heat-Resistant - With resistance to up to 500°C, it's the perfect mat for soldering Multi Compartments...

This tip is used with the following Hakko Soldering Stations and Systems: Hakko FX-888 Soldering Station Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System) Hakko 907 Soldering Iron Hakko 907-ESD Soldering Iron Hakko 900M...

Increase work efficiency and organize your bench with Hakko 611 solder reel stands. Draw solder wire as you need with smooth reeling action. Dual reels offers the flexibility to use different wire solder or share with another operator. Specifications ...

Hakko Iron Cover 605M - One piece The 605M iron cover provides heat resistance and thermal insulation for your soldering iron, allowing you to place it back into your tool box immediately after use. No need to wait for the iron to cool down first. Fits...

The Hakko PD-03-D manual desoldering tool provides a low cost and effective method for removal of residual solder during desoldering operations. With the press of a button, the spring activated vacuum system sucks the molten solder into the collection...

TIP POLISHING PASTE The Hakko FS-100 paste re-tins oxidized soldering iron tips and is 100% Lead-Free. The flux does not contain Diammonium phosphate and does not leave a corrosive residue. (Conforms to JIS-Z-3197 6.6.1 test method.) Depending on the...

SOLDERING IRON HOLDER with 599B TIP CLEANER Comes with Hakko 599B tip cleaner (clean your tip without water!) For use with the Hakko FX-600 • FX-601 • FX-650 • FR-300 • FR-301 • N452, N453, N454 (DASH), 918, 920, 921, 922...

A lightweight portable soldering iron with a lock out temperature key. A perfect 74W iron for the DIY hobbyist that uses T18 tips. Over 30 different tip shapes at a temperature range from 400°-932°F. Features Adjustable temperature...

Features Boost Control Provides some Extra Power Tip Sleep Function & Password Lockout Large Backlit Display & Auto-Power Off No Calibration Required (at 13.56 MHz) User Profile for Tip and Solder Selection The HAKKO FX-100 Soldering Station...

Features T31 Series Composite Tip This tip is used with the Hakko FX-100 Induction Heat Soldering System Use with the Hakko FX1001-51 soldering iron. Temperature: 750°F (400°C) Specifications Reference  T31 and T35 Series Tip...