Description This splitter separates the 5V power and data lines in a USB cable. Power and data go to different places, while ground remains shared. This prevents power conflict and protects your devices. It is designed primarily for DIY PiKVM setups...

Waveshare 27736 - Industrial Gigabit PoE Splitter, 5V 5A Type-C, Onboard MPS Control Chip, Safe and Stable - POE-SPLITTER-25W-TYPE-C The Waveshare POE-SPLITTER-25W-TYPE-C PoE splitter provides reliable 5V/5A Type-C power from Gigabit PoE...

Raspberry Pi PoE+ Injector - SC1677 The Raspberry Pi PoE+ Injector is a single-port 30W injector suitable for powering devices conforming to the IEEE 802.3af specifications, including all generations of Raspberry Pi PoE HAT. It supports network...

USB-C PD Power Supply for Raspberry Pi 5, 27W, ETL Listed, Black This USB-C PD Power Supply for Raspberry Pi 5 provides up to 27W of stable power. It supports multiple USB-C PD profiles for efficient delivery across loads. Certified by UL, CSA, and...

Power from each USB-C input (A/B) connector goes via a MOSFET "Ideal Diode" to the USB-C output connector. USB2 data from the USB-C port (A) is connected to the output USB-C connector (USB3 data is not connected/passed through). The ideal diode...

Raspberry Pi - 27W USB-C Power Supply Black US - SC1158The Raspberry Pi 27W USB-C Power Supply is an ideal power supply for Raspberry Pi 5, especially for users who wish to drive high-power peripherals such as hard drives and SSDs from Raspberry Pi...

The new 27W USB-C PD (Power Delivery) Power Supply will deliver a maximum of 5.1V, 5A enabling the Raspberry Pi 5 to power a wider range of peripherals. The total power drawn from the four USB ports on Raspberry Pi 5 is limited by default to a nominal...

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and...

Waveshare 19739 - UPS HAT (C) For Raspberry Pi Zero, 5V Uninterruptible Power Supply, Multi Battery Protection Circuits - UPS HAT (C) SAFETY CAUTIONS Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury,...

12V 2A Power Supply, 5.5x2.1mm DC Jack, for CM4 - US - Black - UL ListedThis 24W power supply is perfect for the Raspberry Pi Compute Module 4 and many other applications. SPECIFICATIONS 12V output voltage 2A output current 2.1mm x 5.5mm x...

Waveshare 23884 - Uninterruptible Power Supply (UPS) Module, Supports Charging And Power Output At The Same Time, 3S & 5V 5A Output - UPS Module 3S (US) This Uninterruptable Power Supply (UPS) module takes three 18650 lithium-ion...

Power your Pi with a wide range of (DC) input voltages from 3 to 16V! Wide Input SHIM lets you use a range of different DC power supplies with your Pi, including the ubiquitous 12V barrel jack power supplies. It's super-skinny, so you can solder it...

Waveshare 23285 - Power Over Ethernet HAT (E) For Raspberry Pi 3B+/4B, 802.3af-Compliant - PoE HAT (E) Features The PoE HAT (E) is a mini 802.3af-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small HAT and some...

Guaranteed reboot after shutdown. After a soft shutdown, the power on a Raspberry Pi needs to be toggled to reboot. This is done by pulling the USB power source out or installing an on/off switch. This becomes an issue when a Raspberry Pi is deployed...

Waveshare 20567 - UPS HAT (B) For Raspberry Pi, 5V Uninterruptible Power Supply, 5A High Current, Pogo Pins Connector Features Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the...

Pi4, ClusterHAT, FanSHIM, etc. NOT included. Keep the 3.3v rail alive between reboots. When rebooting a Raspberry Pi 4 the 3.3 volt rail is reset which causes problems for some HATs. 3v3 Sustain fits in between a Raspberry Pi and a HAT/pHAT and provides...

Waveshare 19694 - UPS Module For Raspberry Pi Pico, Uninterruptible Power Supply Raspberry Pi Pico and Li-ion battery are NOT included. SAFETY CAUTIONS Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property...

Official Micro USB Power Supply - White - USThis new single-head micro USB power supply is suitable for use with the Raspberry Pi Zero 2 W, as well as the Raspberry Pi 1/1+/2/3/3+ models, and the original Raspberry Pi Zero and Zero W...

Raspberry Pi 48W Power Supply for Build HAT - White - US Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO® TechnicTM motors, as...

USB-C Power Supply - 5.1V 3.0A - UL Listed - Black - On/Off Switch - For Raspberry Pi 4/400This is a high quality switching ‘wall wart’ AC to DC 5.1V 3.0A USB-C wall power supply manufactured specifically for projects that require a higher...