other

If you plan on connecting a cable to the GPIO connector, you might need a GPIO Stacking Header for Pi - Extra-long 2x20 Pins An armor aluminum alloy case with dual cooling fan designed for...

This is a great general purpose-actuator for tiny mechanisms. The FS90 offers positive control over a 120 degree angle. Operating angle controlled by standard servo pulses between 900us and...

Material: PlasticColor: RedVoltage: 3A 125VLeads: Solder lugsContacts configuration: SPSTSwitch method: OFF / ON

This straight bar load cell (sometimes called a strain gauge) can translate up to 5kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that...

High quality aluminum heatsink for cooling the Raspberry Pi Zero's processor. Base with 3M thermal adhesive. Compact and fits into our Unipicase Zero Standard.  Technical...

The VK-162 GPS Receiver is a low cost High sensitivity GPS Receiver + Internal Antenna with USB connector. It is a stand alone GPS receiver providing a solution with high position and speed accuracy...

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat Noodle Cable - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat "noodle" cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

A 4-Way Riser perfect to use with the Raspberry Pi PoE HAT! Specifications Pitch: 2.54mm Gender of Connector: Female Number of Pins: 2 x 2 Pin Type of Row: Double-Row Body Orientation:...

SIYOTEAM's USB 2.0 Card Reader T18 is a high-quality micro SD reader and writer. This memory card reader/writer delivers High Speed USB 2.0 data transfer rate up to 480Mbps, supports USB 2.0 plug and...

These LED strips come in 5 meter reels. These strips are sold by the meter! If you buy 5 meters at a time, you'll get full reels with leads at both ends. If you buy less than 5m, you'll get a single...

Use this switched battery holder to power your Micro:bit or other device. Equipped with a JST-PH male connector.

This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as our micro servo (like the FS90, FS90R, SG92R) but it isn't a servo. It's more like...

This is a beefy switching supply, for when you need a lot of power! It can supply 12V DC up to 5 Amps, running from 110V or 220V power (the plug it comes with is for US/Canada/Japan but you can use...

Features Item Name  Alkaline Battery LR6 AA Nominal Voltage: 1.5 V Average Weight:23±1g Average Height: 49.2-50.5mm Average Diameter:13.5-14.5mm Discharging...