other

This large (40x30x5mm) heatsink will let you eek out some extra thermal performance from power-hungry tasks. It's really perfect for the Raspberry Pi 4!It will also fit most cases. It's just 5mm...

A set of two fans mounted on an aluminum heatsink to cool the CPU. Ideal for Raspberry Pi 4 Model B and Raspberry Pi 3 Model B+(Plus)!  Features Pre-applied thermal tape for easy...

If you plan on connecting a cable to the GPIO connector, you might need a GPIO Stacking Header for Pi - Extra-long 2x20 Pins An armor aluminum alloy case with dual cooling fan designed for...

If you plan on connecting a cable to the GPIO connector, you might need a GPIO Stacking Header for Pi - Extra-long 2x20 Pins An armor aluminum alloy designed for the Raspberry Pi 4B. This...

If you plan on connecting a cable to the GPIO connector, you might need a GPIO Stacking Header for Pi - Extra-long 2x20 Pins An armor aluminum alloy case with dual cooling fan designed for...

Material: PlasticColor: RedVoltage: 3A 125VLeads: Solder lugsContacts configuration: SPSTSwitch method: OFF / ON

This straight bar load cell (sometimes called a strain gauge) can translate up to 5kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that...

High quality aluminum heatsink for cooling the Raspberry Pi Zero's processor. Base with 3M thermal adhesive. Compact and fits into our Unipicase Zero Standard.  Technical...

The VK-162 GPS Receiver is a low cost High sensitivity GPS Receiver + Internal Antenna with USB connector. It is a stand alone GPS receiver providing a solution with high position and speed accuracy...

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat Noodle Cable - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat "noodle" cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

A 4-Way Riser perfect to use with the Raspberry Pi PoE HAT! Specifications Pitch: 2.54mm Gender of Connector: Female Number of Pins: 2 x 2 Pin Type of Row: Double-Row Body Orientation:...

SIYOTEAM's USB 2.0 Card Reader T18 is a high-quality micro SD reader and writer. This memory card reader/writer delivers High Speed USB 2.0 data transfer rate up to 480Mbps, supports USB 2.0 plug and...

These LED strips come in 5 meter reels. These strips are sold by the meter! If you buy 5 meters at a time, you'll get full reels with leads at both ends. If you buy less than 5m, you'll get a single...

Use this switched battery holder to power your Micro:bit or other device. Equipped with a JST-PH male connector.