Categories - PiShop.ca

Sub Categories

THIS ITEM IS NO LONGER AVAILABLE AS AN INDIVIDUAL COMPONENT The AND Bit is a logic gate with two inputs. Just like its name implies, it sends an ON signal from its output only when input one AND input two are both receiving an ON signal. Real World...

Notify Me

littleBits - Wire

$0.14

THIS ITEM IS NO LONGER AVAILABLE AS AN INDIVIDUAL COMPONENT The wire Bit is just what it sounds like - it allows you to physically separate your Bits. Try it whenever you need to break up your chain of Bits, like when you need to put a light at the top...

Notify Me

littleBits - Motion Trigger

$0.14

THIS ITEM IS NO LONGER AVAILABLE AS AN INDIVIDUAL COMPONENT The motion trigger is similar to the sensor on an automatic door: when someone is moving nearby, it sends an ON signal to the following Bits. It's very sensitive, so don't breathe unless you...

Notify Me

littleBits - Button

$0.14

THIS ITEM IS NO LONGER AVAILABLE AS AN INDIVIDUAL COMPONENT The button Bit is a classic: big, round and springy for comfortable pressing! Push to turn your creation on, and release to turn it off. Snap a buzzer in place after your button to sound out...

Notify Me

littleBits - Toggle Switch

$6.95 $12.45

The toggle switch Bit is sturdy on/off switch that you can use to activate your creations with a nice, solid click. Try using it after a USB power Bit as an on/off switch for your whole creation. Check out our Tips + Tricks for more ideas on using the...

Notify Me

littleBits - Bright LED

$0.14

THIS ITEM IS NO LONGER AVAILABLE AS AN INDIVIDUAL COMPONENT The bright LED (or "Light-Emitting Diode") is a small module that puts out a big light. Just like our other LED modules, it's a great way to shed some light on your creations. Choose the bright...

Notify Me

littleBits - DC Motor

$0.14

THIS ITEM IS NO LONGER AVAILABLE AS AN INDIVIDUAL COMPONENT The DC (or "Direct Current") motor rotates a shaft when you send it an ON signal. It even has a switch to set the direction of rotation! It also includes the motorMate-- an accessory that makes...

Notify Me

littleBits - Vibration Motor

$0.14

THIS ITEM IS NO LONGER AVAILABLE AS AN INDIVIDUAL COMPONENT The vibration motor is very similar to the device that makes your cellphone shake when you get a text. With this module, you can make anything vibrate and buzz! This module also includes the...

Notify Me

littleBits - RGB LED

$0.14

THIS ITEM IS NO LONGER AVAILABLE AS AN INDIVIDUAL COMPONENT The RGB LED (or "Red-Green-Blue Light-Emitting Diode") Bit is a special light whose color you can adjust. Use the included screwdriver to adjust each of the color channels to get almost any...

Notify Me

littleBits - Long LED

$1.00

THIS ITEM IS NO LONGER AVAILABLE AS AN INDIVIDUAL COMPONENT The long LED (or "Light-Emitting Diode") Bit is another lighting option. We call it the "long" LED because the light is tethered to the board by a cable. This lets you put the light in some...

Notify Me

Uno R3 Rev3 Development Compatible Board

$12.95 $15.95

This is an Arduino-compatible product Added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board Reliable RESET...

Notify Me

Altoids Gum Sized Tin

$2.95

Ever since Altoids discontinued the Gum version, its been hard to get tins. So Adafruit went and got a whole mess of them custom made! These tins are exactly the same shape and size as the old Altoids gum tins but they are blank and they got the bottom...

Add to Cart

Adafruit USB Power Gauge Mini-Kit

$15.00

This little USB port go-between is like a speed gauge for your USB devices. Instead of hauling out a multimeter and splicing cables, plug this in between for a quick reading on how much current is being drawn from the port. Great for seeing the charge...

Notify Me

Assembled Pi Cobbler Plus - Breakout Cable for Raspberry Pi A+/B+/Pi 2/Pi 3

$11.95

The Raspberry Pi B+ / Pi 2 / Pi 3 / Pi 4 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably...

Add to Cart

Assembled Pi T-Cobbler Plus - GPIO Breakout for A+/B+/Pi2/Pi3/Pi4/Zero

$12.95

This is the assembled version of the Pi T-Cobbler Plus. It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3, Pi 4! Or just any Pi with 2x20 connector. The Raspberry Pi B+ and Pi 2 has landed on the Maker World like a 40-GPIO...

Add to Cart

Downgrade GPIO Ribbon Cable for Raspberry Pi Model B+2B/3B 40p to 26p

$3.45 $4.45

You got a Raspberry Pi Model B+ that you want to have work with some old kit or plate or breakout or something and it uses the classic 26-pinout. Very frustrating, it is...unless you have this ingenious 'downgrade' GPIO cable. It has a 40-pin socket...

Add to Cart

5FT Cat6 Ethernet Cable

$1.95

Connects any CAT6 application such as computer to hub, patch panel or wall jack. This 550MHz CAT6 PVC stranded patch cord meets TIA/EIA 568A specifications, and support all CAT6 and other high speed applications. It has stranded wires for added cable...

Add to Cart

HighPi Pro 5V Cooling Fan

$6.95

Looking for another way to keep your Raspberry Pi cool? Hook up this 5V Mini Cooling Fan and prevent your hard-working Pi from overheating! Of course, it's also great for use with any small computer or FPGA or motor driver or anything...

Add to Cart