Categories - PiShop.ca

Sub Categories

Anti-Static Wrist Band with Strip

$1.95

Current Limiting resistor IMΩ +/- 5% Electro-scattering time 0.1 sec Safe and reliable Adjustable at will Rinsing resisting Suitable for use in clean rooms

Add to Cart

26 pin GPIO extension cable

$1.95

Use this female-female cable to extend from your Raspberry Pi GPIO header to a Pi Cobbler or similar male header on your breadboard. Length is 20 cm (8 inches).

Notify Me

PL2303 USB to RS232 TTL Converter Cable Module

$4.95

This inexpensive USB to RS232 cable works well for Linux and Windows 7 environments, but is not currently functioning with Windows 10. Suitable for link download Simple and easy way to give USB support to your designs Cable functions: Red cable:...

Add to Cart

Arduino Compatible USB Host Shield

$23.95

USB Host Shield is an inexpensive development board designed to be used in embedded applications which require USB Host functionality. The board supports USB 2.0 full/low speed operation. Primary target platform is Arduino, however, it can also be used...

Add to Cart

Arduino Compatible Digital Temperature Humidity Sensor Module (DHT11) (With Indicator LED)

$6.95

This is a digital temperature and humidity sensor module that works with all of the Arduino micro-controllers. Because it is a digital sensor it only necessitates 3 connections, Vcc, GND, and a digital pin for data output. With this sensor you get two...

Add to Cart

Compatible LCD Display 2.5" (LCD 1602) (I2C communication)

$8.95

This is a very popular LCD for the Arduino or Freeduino board. It includes a 2×16 LCD display which is backlit in blue. It uses the I2C communications protocol so it is compatible with any Arduino or Raspberry Pi! Key Features: Supports I2C...

Add to Cart

Arduino Compatible Digital and Analog Microphone/Sound Sensor Module (LM393)

$3.95

4pin Mini Voice Sound Sensor Module Microphone Sound module - LM393 Chip This sensor emits a signal if the microphone of the sensor detects a noise. The sensitivity of the sensor can be adjusted by means of a controller...

Notify Me

1-Channel Relay Module for Arduino & Raspberry Pi (Keyes)

$4.45

Operating Voltage: 5V With LED indicates relay status Control terminal, low level pull, high level relay release Great for DIY project

Notify Me

4-Channel Relay Module for Arduino & Raspberry Pi - 5V

$7.95

4-Channel Relay Module for Arduino & Raspberry Pi - 5V This is a 5V (Trigger Voltage) 4-Channel Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430. Description 5V...

Add to Cart

2-Channel Relay Module for Arduino & Raspberry Pi - 12V (Keyes)

$4.95

AC voltage maximum 250V AC current maximum 10A DC voltage maximum 30 V DC current maximum 10 A Working voltage 12V Includes optocouplers so that your Arduino or Raspberry Pi does not get damaged by reverse voltages Signal Type TTL Has the fixed bolt...

Notify Me

2-Channel Relay Module for Arduino & Raspberry Pi - 5V

$4.95

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP,...

Add to Cart

Uno Compatible Motor Control Shield (L293D Motor Driver)

$8.95 $9.95

This is a motor shield for an Arduino Uno that makes it easy for your Arduino to control various types of motors! All you need to do is attach this to your Uno, run wires from your motors to the respective terminal blocks, and supply some external power...

Add to Cart

Arduino Compatible Digital Light Sensor (BH1750FVI)

$4.95

This is a digital light sensor that can be used to precisely measure the ambient light level. Â The sensor has a 16 Bit AD converter so it outputs a digital signal that can be read using the Arduino's serial connections. Â It...

Notify Me

Arduino Compatible Precision Real Time Clock Module (DS1307)

$5.95 $7.95

This is what is known as a Real Time Clock (RTC) module and can be used with any Arduino so that it can tell time. The Arduino does not have a RTC on board and therefore can not tell time for an extended period of time with any accuracy. When the Arduino...

Notify Me

Arduino Compatible Digital Temperature Humidity Sensor Module (DHT11)

$6.45

Add to Cart

Arduino Compatible Ultrasonic Distance Measuring Sensor Module (HY-SRF05)

$4.95

This is an Arduino Compatible Ultrasonic sensor, it can be used to measure the distance from the sensor to other objects around it. These types of sensors are used on robots for collision avoidance and guidance or as trip sensors for alarm systems or...

Add to Cart

Arduino Compatible 3-axis Gyroscope/Gyro Sensor Module

$7.95

L3G4200D is a 3 axis gyroscope, providing you with very high resolution (16 bit) measurements at up to 2000 degrees per second (dps). The gyroscope measures how much the device is rotating around all three axis, the range is user selectable and so...

Add to Cart

Arduino Compatible I2C Three Axis Accelerometer Module

$7.95

IIC digital output Up to two interruption function Three motion detection channels: Free fall down or motion detection. Pulse detection Vibration detection MMA8452Q is a 12 bit resolution smart, low power consumption, capacitor-type micro...

Add to Cart

Raspberry Pi Youtube Workshop Kit

$24.95

The Raspberry Pi YouTube Workshop kits is a selection of components that was chosen to accompany a series of step-by-step video tutorial posted on YouTube. It demonstrates how to use the Raspberry Pi's inputs and outputs, and how to program using Python...

Notify Me

Infra-red Receiver Sensor (VS1838B) - pack of 10

$2.95 $3.95

This is a lone infra-red sensor for use with an Arduino or Raspberry Pi. It can be used to decode infra-red signals from remote controls such as a TV remote or some RC vehicle remotes. It is especially designed to be reliable and easy to use with...

Add to Cart