Categories - PiShop.ca

Sub Categories

USB Wall Charger - 5V, 1A (Black)

$9.45 $12.60

5V 2A USB power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone or anything else that's power hungry! This adapter was specifically designed to provide 5.25V not 5V, but we still call it a 5V USB adapter...

Notify Me

Pi Model B+ / Pi 2 / Pi 3 Case Base - Smoke Gray

$8.95

This is just the base of the Raspberry Pi Model B+ / Pi 2 / Pi 3 case. This is the smoke-colored base. It reminds us of cold, moonless nights and Bauhaus concerts. This enclosure was designed by Mike Doell...

Add to Cart

Adafruit Pi Protector for Raspberry Pi Model B+ / Pi 2 / Pi3

$8.95 $10.65

You've seen the A+ pocket protector - cometh the hour for the full-size Pi version. Introducing PaintYourDragon's last-cut showpiece part ii: Adafruit Pi Protector for Raspberry Pi! It's not quite a full case, however it will keep your Pi...

Add to Cart

USB Cable with Switch - A/MicroB

$7.65 $10.49

ON...off...ON...off...ON...off...ON...off...WE CAN'T STOP CLICKING THIS ON-OFF SWITCH! It has such a satisfying click and it works so well. Plus, it's just about perfect for charging your Raspberry Pi - either Model B, A+, B+, or Pi...

Add to Cart

Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

$27.95 $34.95

Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Raspberry Pi and motors are not...

Add to Cart

Raspberry Pi Model B+/2/3 Case Lid - Clear

$3.95

Now that we have The Single Greatest Raspberry Pi Model B+/2/3 Case Ever - we decided to make it even better by adding COLORS!!!!! Mix and match snap-on lids and bases to form your favorite combinations. Buy one base then match...

Add to Cart

SparkFun ESP8266 Thing

$20.45 $27.95

The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC - a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just...

Notify Me

Pimoroni - Piano HAT

$22.95 $33.95

Unlock your inner Mozart with Piano HAT, the ultimate mini musical companion for your Raspberry Pi!Piano HAT is inspired by Zachary Igielman's PiPiano and made with his blessing. We've taken his fabulous idea for a dinky piano add-on for the...

Notify Me

MicroHOPE - MCP2200 USB to Serial Adapter

$7.95 $14.95

This board is used for testing the soft-serial interface of MicroHOPE. It can be used as a general purpose USB to Serial Converter.

Add to Cart

MicroHOPE USBASP Programmer Board

$7.95 $14.95

This is an open sourced ISP (In-System Programming) programmer available from http://www.fischl.de/usbasp/.This is provided as an accessory to MicroHOPE due to several reasons. If you want to develop programs that uses the UART of Atmega32, you need to...

Add to Cart

Pimoroni Raspberry Pi 7" Touchscreen Display Frame - Coupé

$19.95

This frame is NOT compatible with the Raspberry Pi Touch Display 2. Protect your lovely 7" Raspberry Pi Touchscreen with this lovely display frame! 3 unique layers provide support and protection to the back of the screen 2 legs hold your screen at...

Choose Options

Pimoroni Raspberry Pi 7" Touchscreen Display Frame - Noir

$19.95

Choose Options

Conductive Silver Ink Pen - Standard Tip - CW2200STP

$79.92

There are two 'tips' available - standard and micro. The microtip allows for finer control but is a little harder to use (because it doesn't deposit as much silver at once).The CW2200STP (standard tip pen) has an orifice size of 1 mm and will draw traces...

Notify Me

Rugged Metal On/Off Switch with Blue LED Ring - 16mm Blue On/Off

$6.95

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of...

Add to Cart

Rotary Encoder + Extras

$5.95

This rotary encoder is the best of the best, its a high quality 24-pulse encoder, with detents and a nice feel. It is panel mountable for placement in a box, or you can plug it into a breadboard (just cut/bend the two mechanical side tabs.) We also...

Add to Cart

Breadboard-friendly MIDI Jack (5-pin DIN)

$2.95

To celebrate the 30th Anniversary of the invention of MIDI we're carrying these handy 5-pin MIDI jacks. They're what you see on the back of nearly every synthesizer and drum machine. These are nice sturdy jacks, and breadboard-friendly, with all the pins...

Add to Cart

Configurable Spring Terminal Blocks - 3 Pin 0.1" Pitch x 5

$8.95

Spring terminal blocks will simplify your wiring and make your project more rugged. Instead of soldering wires to your perf board, solder in these 0.1" pitch terminal blocks. There's a little spring contact so you can pull back on the plastic bit and...

Notify Me

IC Socket - for 8-pin 0.3" Chips - Pack of 3

$0.95 $1.45

An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 8 pin 0.3" wide version. Best used with chips that have 8 pins (2x4) and have 0.3" pin spacing. These are often...

Notify Me

5mm Plastic Flat LED Holder - Pack of 5

$2.45

Keep your 5mm LEDs in place with these little plastic LED holders. These are handy for projects using individual LEDs as they look sleek, and your LED won't budge. Slot the LED through the opening and you'll get a nice *snap* into place. Comes as a...

Add to Cart

Fine tip curved tweezers - ESD safe - 120mm

$5.95

When soldering small surface-mount (SMD/SMT) components, one thing you'll need is a good pair of tweezers. These are a great pair of every-day tweezers. They're anti-static, anti-magnetic and made of hard stainless steel. The tips are fine and pointy to...

Add to Cart