Categories - PiShop.ca

Sub Categories

Raspberry Pi Zero v1.3 Camera Cable

$7.45

Please Note: The Raspberry Pi Zero and the Camera is NOT included in this product! This camera cable is specifically designed to work with the Raspberry Pi Zero - Version 1.3! Just plug it into your Pi Zero's camera port and then the other end into one...

Add to Cart

HDMI Flat Cable - 50cm long

$2.95 $4.95

Connect two HDMI devices together and save space with this basic flat HDMI 1.4 cable. It has nice molded grips for easy installation, and is ~50 cm.

Add to Cart

IoT Power Relay - Version 2

$77.81

Say goodbye to hazardous high voltage wiring and create the Internet of Things with safe, reliable power control. The IoT Power Relay from Digital Loggers is custom designed to fit your every need when developing projects...

Add to Cart

ModMyPi Modular RPi 2/3 Case - VESA Splash (75/100mm)

$5.95

The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker,...

Notify Me

3-pin JST SM Plug + Receptacle Cable Set

$2.95

These 3-wire cables are 163mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 3 wires you want to be able to plug...

Add to Cart

2-pin JST SM Plug + Receptacle Cable Set

$1.25

These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type receptacle connector. They are good for whenever you have 2 wires you...

Add to Cart

Picade Console

$126.95

Power-up your TV with Picade Console! It's a compact, Raspberry Pi-powered retro games machine with authentic arcade controls that plugs right into your TV, monitor, or other HDMI display. Picade Console is fight stick-style arcade console that riffs...

Add to Cart

40 Pin GPIO Connector Header

$1.95

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made 2x20 female header. The female header part has extra spaces to make it tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. The stacky pin...

Add to Cart

USB to Micro USB Cable With ON/OFF Switch - 1.5M

$3.45

This USB to Micro USB Cable with switch is 1.5m long and is the perfect hard on/off power switch for your Raspberr yPi. This cable can be using in conjunction with a USB mains charger such as our Ultra HQ USB Power Supplies and it's made...

Add to Cart

USB OTG Host Cable - MicroB OTG male to A female

$3.45

The USB OTG Host Cable – MicroB OTG male to A female lets you plug full-size USB devices (like keyboards, mice, flash drives) into devices with a Micro-B OTG port. It’s passive, so it only carries data and power. Works...

Add to Cart

USB / DC / Solar Lithium Ion/Polymer charger - v2

$23.95

NOTE: This product is only designed for use with Adafruit solar panels. We cannot guarantee this will work with solar panels purchased elsewhere. A 2.1mm adapter cable is also required to adapt a solar panel to the DC power jack. Make your projects to...

Notify Me

12mm Coin Cell Breakout w/ On-Off Switch

$4.95

Simple but effective - this breakout board has a CR1220 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a...

Notify Me

Diffused 5mm Slow Fade Flashing RGB LED - 10 pack - Slow fade

$4.95 $6.95

These are very interesting 5mm diffused RGB LEDs - instead of having 4 pins to control 3 LEDs, they have only two leads - power and ground. When powered, the LEDs perform a slow fade through the rainbow, from red to orange to yellow, etc till they get...

Add to Cart

Raspberry Pi Camera V2 - 8MP

$21.95

The Raspberry Pi Camera Module v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It's capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and...

Add to Cart

Wall Adapter Power Supply - 5.1V DC 2.5A (USB Micro-B)

$9.95

Micro-USB Power Supply - 5.1V 2.5A - UL Listed - For Raspberry Pi 3B/3B+/2/1 and Zero, Zero W & Zero WH boardsThis is a high quality switching ‘wall wart’ AC to DC 5.1V 2.5A USB Micro-B wall power supply manufactured specifically for...

Add to Cart

Dual microB USB Power Cable

$5.45

Want to use your new Official Raspberry Pi 7" Touchscreen Display but need to keep your GPIO pins free? This handy little cable is just what you need! We love the Raspberry Pi touchscreen but we hate to block up our GPIO! That's why we had these...

Notify Me

Propeller HAT

$19.95 $24.95

Propeller HAT will get you flying in the world of microcontrollers; whether you're just learning the ropes, or using it as an integral part of your home automation project. We've brought the much adored Parallax Propeller microcontroller to the Raspberry...

Notify Me

SparkFun Beginner Tool Kit

$74.90

This assortment of tools has everything you need to get started tinkering with Sparkfun products and beyond! The kit specifically caters to those of you who are new to soldering. Sparkfun has found their favorite, low-cost and easy to transport tools,...

Notify Me

High Temperature Adhesive Tape - (1cm, 33m)

$8.95

Polyimide Tape (sometimes referred to by the brand name Kapton Tape) is an interesting addition to your toolbox! Polyimide Tape remains stable across a wide range of temperatures from about ÂˆÂ’269°C to +400°C...

Notify Me

Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board

$10.95

Spin two DC motors, step one bi-polar or uni-polar stepper, or fire off two solenoids with 1.2A per channel (3A peak) using the TB6612. These are perhaps better known as "the drivers in our assembled Adafruit Motorshield or Motor HAT." We...

Add to Cart