![Kitronik Prototyping System for the BBC micro:bit Kitronik Prototyping System for the BBC micro:bit](https://cdn11.bigcommerce.com/s-am5zt8xfow/images/stencil/500x659/products/3355/10739/5609_large_prototyping_system_for_the_bbc_microbit_f9ee0587-c940-4b8f-aef1-a9ded0646e66_700x__44066.1683124669.jpg?c=2)
This Prototyping System for the BBC micro:bit is a great way to start making circuits and making experiments without the need to solder.
This prototyping system uses our specially designed Edge Connector Breakout Board for BBC micro:bit that gives full access to the pins on the bottom of the BBC micro:bit. The BBC micro:bit pins are broken out to a row of pin headers, the SCL and SDA pins are separated at the edge of the board providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.
This prototyping system is used in conjunction with a Small Prototype Breadboard. This makes it easy to connect additional components using the included jumper wires. No soldering required.
Note: This kit requires assembly.
Features
- No soldering is required.
- Breaks out 21 pins from the BBC micro:bit using the Pre-built Edge Connector Breakout Board for BBC micro:bit.
- Small Prototype Breadboard included so you can use additional components.
- Run your own custom code from your BBC micro:bit to interact with external components.
Contents
- 4 x Pan Head M3 Machine Screws.
- 1 x Small Prototype Breadboard.
- 10 x Jumper Wires Male to Male.
- 10 x Jumper Wires Male to Female.
- 1 x Mounting Plate.
- 1 x Edge Connector Breakout Board for BBC micro:bit - Pre-built.
Requires
- 1 x BBC micro:bit.
- 1 x Phillips Screwdriver.