Electronic Components

Add rotational sensing - without a mechanical connection - with the Adafruit AS5600 Magnetic Angle Sensor. Featuring the classic ams AS5600, this board can sense a rotating N/S magnetic field up to...

Description The Adafruit TSL2585 Digital UVA and Ambient Light Sensor is a great "three-in-one" light sensor that  has ambient light sensing, Infrared channel and UVA (315nm-400nm). In...

The vibration motor is very similar to the device that makes your cellphone shake when you get a text. With this Bit, you can make anything vibrate and buzz! This Bit also includes the vibeSnap-- an...

The pressure sensor is a touch-activated Bit - give its pad a little squeeze to activate it. The more pressure you apply, the more signal it sends out. Put it in front of a vibration motor to control...

You know what a button is! It's a classic: big, round, and springy. Push to turn your creation on, and release to turn it off. Snap a buzzer in place after your button to sound out signals in morse...

Throw out all those Mini and Micro B USB cables you have in a plastic bin - the next generation of USB connectors is here with USB C! You will start to see these connectors pop up on all sorts of...

Waveshare 20315 - M.2 M KEY to A KEY adapter, only supports devices with PCIE channel, supports USB conversion Features Only supports devices with PCIE channel M.2(A KEY) 2230/2242 TO M.2(M KEY)...

Stretch out your servo connections with this flexible servo extension cord. It has a 3-pin shrouded "male" connection to plug your servo into and then, 30cm later, a 3-pin female connection. The...

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of...

If you bought a servo, you probably got a bunch of plastic add-ons that you can snap onto the rotating part of the servo. These are called 'servo horns'. For many robotics projects you'll end up...

If you bought a servo from us you probably got a bunch of plastic add-ons that you can snap onto the rotating part of the servo. These are called 'servo horns'. For many robotics projects you'll end...

I mew, you mew we all mew for IMU! The MPU-6050 is what we call "an oldie but goodie" - this popular triple-axis accelerometer plus gyro combo has been a staple of electronic projects for years, and...

Turn almost any conductive material or object into a computer input.  SPOKE is a plug-and-play capacitive touch board built around the Raspberry Pi RP2040. Plug it into any computer and it...

*sniff* *sniff* ... do you smell that? No need to stick your nose into a carton of milk anymore, you can build a digital nose with the Adafruit SGP41 Multi-Pixel Gas Sensor, a fully integrated MOX...

Note: Pico Board Not Included. The Raspberry Pi Pico Relay Board is a high-quality 4-channel relay module designed to control high-voltage AC and DC loads with your Raspberry Pi Pico. Ideal for home...

The Kitronik Round Side Illumination LED Module is a pre-built board, designed for low-power lighting displays, such as desk lamps, accent lights, and illuminated signs. It has been designed such...

Remote infrared sensors are unique in their ability to measure something they are pointed at, but not touching, and we've been looking for a replacement for the now-discontiued TMP007 for a few years...

This two channel relay module is ideal for switching low voltage AC and DC loads. It is compatible with 3.3V and 5V microcontroller boards such as Arduino, Raspberry Pi Pico and ESP32. Features 2...

Waveshare 11092 - Temperature-Humidity Sensor, DHT22 Onboard This is a calibrated digital temperature and humidity module with onboard sensor DHT22, which features higher accuracy and wider...

Adafruit NeoPot - Clear Shaft Potentiometer with RGB NeoPixel | ID 6387 While researching potentiometers for a future design, we bumped into the nifty RK09K1130D62 clear shaft linear potentiometer...