They come in 5 meter reels with a 3-pin JST SM connector on each end and separated power/ground wires and different color wires than show in the image. These strips are sold by the meter! If you buy 5 meters at a time, you'll get full reels with two...

Connect your prototype circuit to the Arduino easily with this simple to use Arduino shield. It includes a mini-breadboard with self-adhesive backing so you can stick this onto the shield and use it directly. Alternatively you can solder your components...

Please note: you won't be able to use this kit as a TV tuner! The DVB-T standard is not used in North America. This products is used for various communication projects with RTL-SDR. More information here: rtl-sdr.com - About...

This is hot! Literally! Apply 5-12VDC and the stainless steel fibers in this heating fabric will warm up, creating a little heating pad. On one hand, it's just a gigantic resistor. On the other hand, it's flexible, light, and can be wrapped around a...

Bring a little bit of Times Square into your home with this 16 x 32 RGB LED matrix panel. These panels are normally used to make video walls, but in New York you can see them on the sides of busses and bus stops, to display animations or short video...

You got a Raspberry Pi Model B+ that you want to have work with some old kit or plate or breakout or something and it uses the classic 26-pinout. Very frustrating, it is...unless you have this ingenious 'downgrade' GPIO cable. It has a 40-pin socket...

Raspberry Pi 3 GPIO Extension Board For Raspberry Pi 2/3 Model Board Version 2.1 26 pin    

4pin Mini Voice Sound Sensor Module Microphone Sound module - LM393 Chip  This sensor emits a signal if the microphone of the sensor detects a noise. The sensitivity of the sensor can be adjusted by means of a controller...

This is a motor shield for an Arduino Uno that makes it easy for your Arduino to control various types of motors! All you need to do is attach this to your Uno, run wires from your motors to the respective terminal blocks, and supply some external power...

This is what is known as a Real Time Clock (RTC) module and can be used with any Arduino so that it can tell time. The Arduino does not have a RTC on board and therefore can not tell time for an extended period of time with any accuracy. When the Arduino...

This is a lone infra-red sensor for use with an Arduino or Raspberry Pi. It can be used to decode infra-red signals from remote controls such as a TV remote or some RC vehicle remotes. It is especially designed to be reliable and easy to use with...

This is an analog light sensor on a small circuit board that is designed to work with all of the Arduino boards. It is easy to incorporate into any project requiring only a 5v supply, ground, and an analog input to measure the sensors readings.  ...

This is an analog temperature sensor on a small circuit board that is designed to work with all of the Arduino boards. It is easy to incorporate into any project requiring only a 5v supply, ground, and an analog input to measure the sensors readings...

The Fish Dish is a breakout/add on board for the Raspberry Pi (can be used with other boards too - Arduino etc.) which makes it easy and  extremely fun to use the GPIO on the Raspberry Pi. It plugs directly  onto the GPIO pins with a 2 x 13...

This is a very popular LCD Keypad shield for Arduino or Freeduino board. It includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the pushbuttons. The LCD...

Fire resistant CL2-rated cable jacket Unbranded cable with no logos or brand markings Thinner conductors than most other passive cables at the same lengths 10.2Gbps data throughput 1080p resolution at 60Hz 4K resolution at 24Hz 3D video support...

PRO SIGNAL-RPUSB 1M-COMPUTER CABLE, USB A PLUG TO MICRO USB B PLUG, 1M, BLACK High quality standard A-miniB USB cable, for USB 1.1 or 2.0. Approximately 1M (3ft) long from end to end.

This adapter converts an HDMI signal for display on a VGA monitor HDMI to VGA with Audio Converter, 3.5mm Audio & USB power cables, Black Features Convert the HDMI output port to an analog VGA DB-15 connector with this adapter Supports...