The SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the other peripherals you'll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger...

This is a connector that fits directly to the edge contacts of a BBC micro:bit. The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this...

Bring your paper crafts to life with these engaging STEM kit! By adding LEDs and self-sticking motors we're able to create 3D paper craft projects that move, light up, and blink! This is a great way to teach art, design, engineering, and basic...

The ClusterCTRL Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi. Controller Powered by 12-24V PSU (not included). 20 pin header for Power (2x5V and 2xGND for each Pi). 6 pin...

We've got all sorts of diffused bare LEDs in all sorts of colors and sizes. But have you ever laid your paws on this set of kitty-shaped LEDs? These look too cute and charming and will look amazing for any electronics...

The Klip Motor Driver for the BBC micro:bit does much more than just drive motors. It also breaks out pins 0, 1, 2, 3V and GDN (just like the main pads on the BBC micro:bit itself), and there’s a ZIP LED output as well, along with the battery...

Locate your stuff! The Asset Tracker Kit contains all of the pieces you need to build a GSM + GPS location tracker for your most prized possessions. In addition to a GPS Shield, the Asset Tracker Kit comes with a weatherproof enclosure, so it’ll...

Allows four HAT or pHAT (or a mix) to be attached to a single Raspberry Pi 40 way connector. All pins are connected, ID_SD and ID_SC (HAT EEPROM) have cuttable solder jumpers. For HAT/pHAT with an EEPROM (required by the HAT specification) you will...

Add real-time clock and environment sensing (pressure, temperature, & humidity) capabilities to the micro:bit with the Kitronik RTC Board. MakeCode compatible. This RTC & Klimate board is a Real Time Clock (RTC) and environmental sensor (BME280)...

The Microsoft Internet of Things Pack for Raspberry Pi 3 is the best way to get started using Windows 10 and your Raspberry Pi as an IoT enabled device. A collaboration between Microsoft's IoT division and Adafruit, this pack's the best way to...

The SparkFun Large Digit Driver is a chainable controller backpack that can be soldered directly to the back of a large 6.5" 7-segment displays. Large numerical displays are a great addition to any project where you want to be able to see information at...

The A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge is a programmable module well-suited for robotics applications, designed to work either as an auxiliary controller mounted to a Raspberry Pi or as a standalone control solution for a small...

CLEARANCE - The compact 5 port Gigabit Ethernet switch is NOT included and needs to be purchased separately. The BitScope Blade Rack is a 1RU server built with Quattro Pi. It is populated with up to four Raspberry Pi and...

Handheld button/LED board designed for use with CircuitPython What is it? A multipurpose handheld device which could be used as a USB keyboard, keystroke replay, reacting to gestures, serial communication, etc. 4 User Buttons. 9 LED (Red and Amber...

Use these little yellow adapters to connect CUBELETS and LEGO® bricks

We've got all sorts of diffused bare LEDs in all sorts of colors and sizes. But have you ever laid your peepers on this stunning set of sphere-shaped LEDs? These look too cute and charming and will look amazing for any...

The Fish Dish is a breakout/add on board for the Raspberry Pi (can be used with other boards too - Arduino etc.) which makes it easy and  extremely fun to use the GPIO on the Raspberry Pi. It plugs directly  onto the GPIO pins with a 2 x 13...

The colour changing LED in this nightlight kit is automatically illuminated and starts to cycle through various patterns when the light sensor has detected that is dark. The kit uses the light activated board with a colour changing LED. The kit includes...

Streamline your cardboard construction with the MINI-TOOL 15x Makedo MINI-TOOL See how easy it is to join cardboard together with Makedo: Punch a hole through the material using the MINI-TOOL, Insert the SCRU into the socket on the...

Make your micro:bit sing with noise:bit! It's a tiny speaker that packs a fair bit of punch, and it's perfect for BLEEPS and BLOOPS! Just slot in your micro:bit, and use the sound generation blocks and code in Microsoft...