We've got all sorts of diffused bare LEDs in all sorts of colors and sizes. But have you ever laid your paws on this set of kitty-shaped LEDs? These look too cute and charming and will look amazing for any electronics...

The littleBits delay module takes incoming audio and repeats it, like an echo. It has two knobs: "time", which sets the delay length between a sound and its repetition, and "feedback", which controls how many times the sound repeats. Delays can be long...

This board is used for testing the soft-serial interface of MicroHOPE. It can be used as a general purpose USB to Serial Converter.

External Programming Cable Do I need this cable? No. You can develop code, debug and program the Sleepy Pi or Sleepy Pi 2 from your Raspberry Pi quite happily… …But there are times when you think: “Do you...

Removable LEGO® compatible 6 x 10 top with four color options Works with the Raspberry Pi B+, 2, and 3 Works with all GoPro® compatible mounts 3 holes that align with 75mm VESA mounts Works with GPIO cables without strain relief Includes 4...

Bring your paper crafts to life with these engaging STEM kit! By adding LEDs and self-sticking motors we're able to create 3D paper craft projects that move, light up, and blink! This is a great way to teach art, design, engineering, and basic...

Try the JavaScript of things with the Espruino - the world's first open-source JavaScript microcontroller! This little board has an STM32 microcontroller pre-programmed with Espruino all ready to go so you can start playing with...

Its a mini panel-mountable HDMI monitor! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This backpack features the TFP401 for decoding video, and includes the...

The Microsoft Internet of Things Pack for Raspberry Pi 3 is the best way to get started using Windows 10 and your Raspberry Pi as an IoT enabled device. A collaboration between Microsoft's IoT division and Adafruit, this pack's the best way to...

The SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the other peripherals you'll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger...

The ClusterCTRL Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi. Controller Powered by 12-24V PSU (not included). 20 pin header for Power (2x5V and 2xGND for each Pi). 6 pin...

The colour changing LED in this nightlight kit is automatically illuminated and starts to cycle through various patterns when the light sensor has detected that is dark. The kit uses the light activated board with a colour changing LED. The kit includes...

The JST Version Klip Halo V2.0 board for the BBC micro:bit breaks out each of the 19 GPIO pins from the BBC micro:bit, with easily accessible, clearly marked connection points compatible with both crocodile clips and 4mm banana plugs. The edge connector...

The Klip Motor Driver for the BBC micro:bit does much more than just drive motors. It also breaks out pins 0, 1, 2, 3V and GDN (just like the main pads on the BBC micro:bit itself), and there’s a ZIP LED output as well, along with the battery...

Add real-time clock and environment sensing (pressure, temperature, & humidity) capabilities to the micro:bit with the Kitronik RTC Board. MakeCode compatible. This RTC & Klimate board is a Real Time Clock (RTC) and environmental sensor (BME280)...

Make your micro:bit sing with noise:bit! It's a tiny speaker that packs a fair bit of punch, and it's perfect for BLEEPS and BLOOPS! Just slot in your micro:bit, and use the sound generation blocks and code in Microsoft...

Locate your stuff! The Asset Tracker Kit contains all of the pieces you need to build a GSM + GPS location tracker for your most prized possessions. In addition to a GPS Shield, the Asset Tracker Kit comes with a weatherproof enclosure, so it’ll...

Handheld button/LED board designed for use with CircuitPython What is it? A multipurpose handheld device which could be used as a USB keyboard, keystroke replay, reacting to gestures, serial communication, etc. 4 User Buttons. 9 LED (Red and Amber...

Use these little yellow adapters to connect CUBELETS and LEGO® bricks

We've got all sorts of diffused bare LEDs in all sorts of colors and sizes. But have you ever laid your peepers on this stunning set of sphere-shaped LEDs? These look too cute and charming and will look amazing for any...