Cat6 Ethernet Patch Cable - Snagless RJ45, UTP, Pure Bare Copper Wire, 24AWG, 5ft, Blue Save the time and hassle of building Ethernet cables by using these fixed-length UTP Cat6 Ethernet Network Cables! These Ethernet cables are made of 100% pure bare...

If you need to add a panel-mount connection for USB C, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can...

This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and...

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice...

This is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting any development board, microcontroller, mobile phone, or other device to your computer or charger. "Standard?" you might say... nothing gets past the astute eye of...

USB Type-C to Micro USB Adapter - Black - Charging & Data Transfer This USB-C to Micro USB adapter lets you connect and charge your Micro USB devices to a USB Type-C port on a computer, charger or tablet.Note: this adapter do not support USB 3.0...

USB Type-C to USB Type-C Cable - USB 3.2 Gen 2 - 3FT (1 meter) - Black This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4, Raspberry Pi 5, and other USB Type C boards.  Specifications Connector A: USB...

This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This...

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The SparkFun 4-in-1 Multi-USB Cable. The SparkFun 4-in-1...

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The SparkFun 4-in-1 Multi-USB Cable. The SparkFun 4-in-1...

3.5mm Premium Mini-Stereo TRS Male to 2RCA Male Cable, Gold Plated, 22AWG

Waveshare 20275 - DSI FFC Flexible Flat Cable 15cm DSI Flexible Flat Cable 15cm 22Pin To 15Pin Black EMI Shielding Film On Both Sides, Enhancing Anti-Interference Performance More Stable Signal...

If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The terminals are labeled with...

If you need to add a panel-mount connection for USB C, but don't have the time or tools to cut a custom oval or square hole, this USB C Jack to USB C Jack Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in...

Compatible with the Raspberry Pi. Tip is Left Ring1 is Right Ring2 is Ground Sleeve is Video

A 15cm extension cable for a microSD card. Insert your microSD card into one end and then connect the other end to your Pi / PC / anything with a microSD socket and voila, you're connected! Resources Dimensional drawing

USB Type-C to USB 3.0 A-Male Cable - 1FT (30cm) - Black This USB-C to USB 3.0 cable lets you connect and charge your USB-C devices (hard drive, mobile, etc...) to a USB Type-A port on a computer, charger or tablet. Specifications Connector...

Allo - Set of DC 5.5 X 2.1mm Adapters Allo Nirvana & Shanti replacement adapters. Content 1 X DC 5.5 X 2.1mm Input to 5.5 X 2.5mm Output 1 X DC 5.5 X 2.1mm Input to 4.0 X 1.7mm Output 1 X DC 5.5 X 2.1mm Input to 4.8 X 1.7mm...

These three wire JST-SH to DuPont cables let you use the debug port of your Pimoroni Pico board for easy, solderless SWD programming. These cables are available with a choice of male or female DuPont (jumper wire) ends - you'll need the male version if...

Pimoroni Pico Debug Cable - Male Version These three wire JST-SH to DuPont cables let you use the debug port of your Pimoroni Pico board for easy, solderless SWD programming. These cables are available with a choice of male or female DuPont (jumper...