The SparkFun gator:microphone is a micro:bit Accessory Board that integrates an electret microphone into SparkFun's gator:bit series of gator-clippable accessories, enabling it to be easily interfaced with the micro:bit or other microcontrollers! It...

2x AAA battery holder with switch.

Click Me to Download the Instructions for this kit. The Servo Kit for micro:bit makes it easy to connect up three servomotors from your micro:bit. Not only that, but the kit also comes with three servomotors and a battery box. Just add a micro:bit and...

The MonkMakes Power for micro:bit opens up lots of ways of powering your micro:bit. This tiny board has a standard DC barrel jack socket at one end and provides a regulated 3.3V output that you can use to power your micro:bit using the JST battery...

The MonkMakes Servo for micro:bit provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a power supply or battery pack to provide 5 or 6V to the servomotors. It includes a voltage regulator that will...

USB 2.0 A MALE TO L-SHAPE MICRO B MALE CABLE, 3FT

USB 2.0 A MALE TO L-SHAPE MICRO B MALE CABLE, 1.5FTPower and program your projects with this USB 2.0 A Male to L-Shape Micro-B Male Cable (1.5ft). Its right-angle connector reduces port strain and fits perfectly in compact builds. Ideal for Raspberry Pi...

USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 6" (15 cm) - Black Power your Raspberry Pi 3/Zero or any Micro-B USB devices with this mini cable. Specifications Connector A: USB Type-A (4 pin) USB 2.0 Connector B: Right Angle...

We got fed up with low quality, overly-long alligator clip leads, so we got some made to our specification. Our leads are supplied in a bundle of 10 leads. Two each of black, red, white, green and yellow. Each lead is 185mm (7.5 inches) long from tip to...

The Kitronik Halo HD board for the BBC micro:bit incorporates 60 individually addressable full colour ZIP LEDs. It also breaks out P1 and P2 to a standard 0.1 footprint, it features a MEMS microphone for detection of sound, and a piezo buzzer to play...

Adjustable sensitivity Analog Photocell Brick allow you to adjust sensitivity of analog Photocel to get digital signal or set a trigger value. Characteristics The 3-pins ports is easy to plug and play. Specifications Item | Parameter :-: | :-:...

Octopus 5mmLED light Brick, and special sensors Arduino board and ambient light sensor extension combination, can be used in the interaction with the light works. When the LED light module connected to Arduino, the digital pin (LOW on, HIGH off) is used...

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digital, analog and I2C/Uart interfaces...

The Solar:Bit is the environmentally friendly way to power your BBC micro:bit and learn about solar power! It includes a 5W solar panel and 1500mAh rechargeable battery pack with charge controller. The battery pack can be charged in about a day using the...

Explore the complexities of sound & noise with the Noise Pack add-on for the Inventors Kit for BBC micro:bit. Learn how to make Instruments, Amplifiers, & EQs! Learn how to bend sound to your will with the Noise Pack add-on for the Kitronik...

Add real-time clock and environment sensing (pressure, temperature, & humidity) capabilities to the micro:bit with the Kitronik RTC Board. MakeCode compatible. This RTC & Klimate board is a Real Time Clock (RTC) and environmental sensor (BME280)...

Control and monitor your world with automation:bit! It's tolerant of up to 24V, with analog and digital inputs, outputs, and a relay, so it's ideal for automating low-voltage systems in your home. Just slot in your micro:bit (sold...

The MonkMakes Relay for micro:bit is a solid-state (no moving parts) relay that allows an output of a micro:bit to turn things on and off. This relay can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or even...

Octopus TMP36 Temperature Sensor Brick for Arduino and micro:bit is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need any external...

The MonkMakes RGB LED for micro:bit can be used to make any colour by controlling the red green and blue levels. Handily mounted on a PCB it connects to the micro:bit using alligator clips. Resources Datasheet (PDF) Instructions (PDF) Hi Res Images...