Lithium Ion Polymer Battery - 3.7v 3000mAh
Li-polymer Battery 755060 3000mAh 3.7V with JST-PH2.0 connector - 24AWG cables 100mm with PCM
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 3000mAh for a total of about 11.1 Wh.
The batteries come pre-attached with a 2-pin JST-PH connector as shown and include the necessary protection circuitry.
The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 1500mA or less.
Like most lipos, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1/2C or even less.
Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.
- Output: 3000mAh at 3.7V nominal
- Connector: 2-pin JST-PH
- Cable: length 100mm, AWG 24
- Dimensions: 7.5x50x60mm