The HiFi AMP Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ through the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering required. Easy to get more beautiful and fantastic sound by...

InnoMaker HiFi DAC Audio Hat for Raspberry Pi The HiFi DAC Hat compatible with Raspberry Pi Zero, Zero W, 3B, 3B+, Pi 4 with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get...

Waveshare 13890 - 1.3inch OLED Display HAT For Raspberry Pi, 128x64 Pixels, SPI/I2C Interface This is an OLED display HAT for Raspberry Pi, 1.3inch diagonal, 128x64 pixels, with embedded controller, communicating via SPI or I2C interface...

Give your Apple iPod Hi-Fi speaker system new life with the Airplay Audio Streaming Adapter. No wires needed, the adapter plugs right into the dock connector.  The adapter powers a Raspberry Pi Zero W that digitally sends the audio signal to a high...

Waveshare 17498 - 2-Channel Isolated RS232 Expansion HAT for Raspberry Pi, SC16IS752+SP3232 Solution, with Multi Onboard Protection Circuits - 2-CH RS232 HAT This is a 2-channel isolated RS232 expansion HAT designed for Raspberry Pi,...

This PoE+ HAT is NOT compatible with the newest Raspberry Pi 5 boards. Use this HAT to add PoE+ capability to your Raspberry Pi's Ethernet port. Compatible with Raspberry Pi 4 and Raspberry Pi 3B+. Power-sourcing equipment is required...

Unsure which PiKVM to choose? See our comparison chart Please note that USB-C displays are not supported. Unfortunately, we have to temporarily limit the purchase to two units per customer due to supply constraints. We hope to be able to offer more...

Transform your Raspberry Pi Pico into a electronic adventure playground packed with physical computing goodies including an LCD screen, motor drivers, a mini breadboard, and much more! Pico Explorer lets you play with circuits, build science...

A vibrant 1.14" IPS LCD screen for your Raspberry Pi Pico, with four useful buttons and a RGB LED! We've sourced a new LCD screen especially for our Pico Display Pack - it's a lovely, bright 18-bit capable 240x135 pixel IPS display and fits the Pico...

  Built especially to showcase Raspberry Pi's low cost, feature-rich RP2040 chip, this board has VGA output, an SD card slot, digital I2S audio output, and more! Based on the reference design by Raspberry Pi our Pimoroni Pico VGA Demo Base is a...

Waveshare 14882 - RS485 CAN HAT for Raspberry Pi, Allows Stable Long-distance Communication The RS485 CAN HAT will enables your Pi to communicate with other devices stably in long-distance via RS485/CAN functions. Features Standard Raspberry Pi...

Feeling fancy? Why not add a Top pHAT to your Pi pHAT stack? The SparkFun Top pHAT for Raspberry Pi is intended to be at the top of a pHAT stack so you won't find any pins for stacking on top of this board, but that's ok, because you will want to...

The SparkFun Qwiic pHAT Extension for the Raspberry Pi 400 & Pi 500 provides you with a quick and easy solution to access all of the 400's GPIO, stack your favorite HAT right-side up, or connect a Qwiic-enabled device to the I2C bus (GND, 3.3V, SDA,...

Compatible with: Raspberry Pi A+/B+/2B/3B/3B+/4B+/Zero This is HiFiBerry DAC2 Pro with a pair of gold-plated RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering. HiFiBerry DAC2 Pro is the sucessor of your popular DAC+ Pro...

Pi (3A+/etc), camera, camera cable, PSU are not included. What is it? APlusCam is designed in the shape of a Raspberry Pi HAT with mounting holes for a Raspberry Pi Camera and suction cups allowing the camera can look out through a window. The...

The ClusterCTRL Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi. Controller Powered by 12-24V PSU (not included). 20 pin header for Power (2x5V and 2xGND for each Pi). 6 pin...

Waveshare 17372 - 4G/3G/2G/GSM/GPRS/GNSS HAT For Raspberry Pi, Based On SIM7600G-H The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty...

Over one hundred RGB LEDs, all individually-controllable, and four tactile buttons. It's the ultimate pocket-sized rainbow generator for Raspberry Pi! Unicorn HAT Mini is a 17x7 matrix of RGB LEDs that can be controlled, both in terms of...

If you're looking for the most compact li'l color display for a Raspberry Pi B+, Pi 2, & Pi 3 (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit Mini PiTFT - 135x240 Color TFT Add-on for...

The I2C multiplexer allows connecting multiple I2C devices with the same address onto a single I2C bus (PCB colour may vary). For each multiplexed output there are 4 pins - data ports SDAx, SCLx GND ground and V for power. The "V" output can be altered...