Waveshare 26399 - Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/At Network Standard Features The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for...

Waveshare 25766 - RTC WatchDog HAT (B) For Raspberry Pi, Onboard DS3231SN High Precision RTC Chip - RTC Watchdog HAT (B) The RTC Watchdog HAT (B) for Raspberry Pi provides reliable timekeeping and system protection. It features an onboard...

Waveshare 25586 - Triple LCD HAT For Raspberry Pi, Onboard 1.3inch IPS LCD Main Screen And Dual 0.96inch IPS LCD Secondary Screens, With 40PIN GPIO Header, Compatible With Raspberry Pi Series Boards Features Standard Raspberry Pi 40PIN GPIO...

While the M.2 HAT will fit in the official case, you won't be able to close it with the lid. Please check out our HighPi Pro 5S Case for Raspberry Pi 5, it is compatible! In either case, the Active Cooler can be installed The Raspberry Pi M.2 HAT+...

Waveshare 19532 - Power Over Ethernet HAT (Type D) For Raspberry Pi 3B+/4B, 802.3af-Compliant, Tailored For Raspberry Pi Official Case - PoE HAT (D) Features The PoE HAT (D) is an 802.3af-compliant Power Over Ethernet accessory for the...

Cytron HAT-MAKER - Maker pHAT: Simplifying Raspberry Pi for Education The Maker pHAT: Simplifying Raspberry Pi for Education helps students and beginners get hands-on with coding and electronics. It includes LEDs, pushbuttons, and a buzzer for...

Monitor, log, and react to gathered sensory data with the Kitronik Air Quality Control HAT for Raspberry Pi. The Kitronik Air Quality Control HAT for Raspberry Pi provides a variety of sensor inputs and connection points for the Raspberry Pi and...

Make some noise with this high quality stereo I2S audio add-on board for your Raspberry Pi Pico, with amplified headphone AND unamplified line level outputs! Raspberry Pi Pico is NOT included. Your Pico will need to have male headers soldered to it...

Turn your Raspberry Pi into a retro games console! Picade X HAT includes joystick and button inputs, a 3W I2S DAC/amplifier, and soft power switch. Nice! Picade X HAT is now Raspberry Pi 4 compatible, with USB-C power! This HAT has all the same great...

PiTalk - 4G IoT HAT - SKU25985PiTalk is a 4G cellular connectivity solution based on Quectel EG25-G LTE Cat 4 module intended for M2M and IoT applications, PiTalk supports data rates up to 150 Mbps downlink and 50 Mbps uplink, integrates GNSS support,...

The Raspberry Pi Sense HAT V2 is the perfect product to learn about programming and how we interact with the world around us. With its full array of sensors, the Sense HAT was originally developed for use on the International Space Station, as part of...

It's 10 PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS, so you can add precision time and location to your Raspberry Pi Model Pi 3, Pi Zero, A+, B+, or Pi...

PIM485 - Pump out some mini beats with Pirate Audio Speaker! This diminutive sound system has an I2S DAC, amp, mini mono speaker, high-res display, and playback control buttons. Pirate Audio Speaker is perfect for making a...

Waveshare 19979 - 2-Channel RS232 Module For Raspberry Pi Pico, SP3232EEN Transceiver, UART To RS232 - Pico-2CH-RS232 Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series Using UART bus, easily converting UART to RS232,...

StackyPi is a compact and advanced board that is designed with the RP2040 Micro-controller, which provides one set of 2x20 pin headers on which you can connect Raspberry Pi HATs. It means that one can plug HAT designed for Raspberry Pi and run it via the...

A fully featured environmental monitoring / citizen science add-on for Raspberry Pi Pico and Pico W. It has a built-in colour 1.54" LCD screen and is jam-packed with sensors! Pico Enviro+ Pack measures just 61 x 31.5 mm, but we've filled it to the brim...

Cyber-warriors, listen up here! We’ve got with some zero-day unreleased hardware we just dumpster-dived. Now you can crack kodes, and write skripts with style, thanks to the CYBERDECK HAT for Raspberry Pi 400 & 500 from Adafruit...

Now with SPI! Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to six Pimoroni breakouts (4xI2C, 2xSPI) into the slots on Breakout Garden and get started...

Now at right angles! An easy, solderless, swappable way to use breakouts with your Raspberry Pi 400/500 - just pop up to three Breakout Garden breakouts (2 x I2C, 1 x SPI) into the slots and get coding and creating! Breakout Garden 400/500 plugs into...

This new Digi2 is a revised version of our Digi+ model which is compatible with both the Pi4 rev. 1.5 and backwards.  Our new design features a second GPIO header that accommodates our add-on boards and has all the same features as our original...