Headers must be under the Picos once installed, for the display and most other add-ons to work.

Raspberry Pi/IQaudio Codec Zero is a Raspberry Pi Zero-sized audio I/O HAT. It delivers bi-directional digital audio signals (I2S) between Raspberry Pi Zero and its onboard Dialog Semiconductor DA7212 codec. Codec Zero supports a range of input and...

This economy breadboard wiring kit contains 140 pcs of cut and preformed jumper wires in a plastic reusable storage box. These wiring kits are ideal for use with any breadboard. Each jumper has stripped ends and preformed right-angled leads for easy...

The adaptor allows the Raspberry Pi 4 to be used with a Pi Micro USB power supply (or DC barrel jack) whilst allowing access to the OTG USB. USB Type-A (data and power) <> USB Data (Micro USB) and Power (Micro USB/Barrel jack). USB Type AMicro...

The ClusterCTRL Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi. Controller Powered by 12-24V PSU (not included). 20 pin header for Power (2x5V and 2xGND for each Pi). 6 pin...

SPECIFICATIONS Rainbow flat cable: IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable Length: about 20 cm / 8 inch Material: High-quantity copper soft wire material for safe and durable Easy assembly:The cables can be separated to form an...

Over one hundred RGB LEDs, all individually-controllable, and four tactile buttons. It's the ultimate pocket-sized rainbow generator for Raspberry Pi! Unicorn HAT Mini is a 17x7 matrix of RGB LEDs that can be controlled, both in terms of...

The ZeroDock is an all-in-one desktop prototyping dock for your Raspberry Pi Zero. Little brother to ProtoDock, ZeroDock will keep your desk tidy and all of your Raspberry Pi Zero accessories in one place. No more searching for...

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your Raspberry Pi Zero but was still small enough that the ghosts wouldn't...

If you're looking for the most compact li'l color display for a Raspberry Pi B+, Pi 2, & Pi 3 (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit Mini PiTFT - 135x240 Color TFT Add-on for...

Caution! This product is NOT compatible with the new Raspberry Pi Zero W 2 Using solderless pins the adapter slides onto the back of a Pi Zero GPIO (If a permanent connection is required the adapter can still be soldered to the GPIO header). The adapter...

USB to (3.3v) Serial adaptor for use with the Raspberry Pi with a pinout designed to plug straight onto Pi GPIO pins (26 or 40 pin). Its a low cost no fuss adaptor which uses built-in USB-CDC drivers on most modern operating systems (Win10/Linux/Mac OS...

Waveshare 17344 - 2inch LCD Display Module, IPS Screen, 240×320 Resolution, SPI Interface This is a general LCD display Module, IPS screen, 2inch diagonal, 240×320 resolution, with embedded controller, communicating via SPI interface...

Waveshare 12039 - Raspberry Pi Camera Module, Pi-Zero/Pi 5-Specific, Mini Size. Features Raspberry Pi Camera, supports only Raspberry Pi Zero family and Raspberry Pi 5 5 megapixel OV5647 sensor Camera specifications CCD size :...

USB 2.0 A MALE TO L-SHAPE MICRO B MALE CABLE, 1.5FTPower and program your projects with this USB 2.0 A Male to L-Shape Micro-B Male Cable (1.5ft). Its right-angle connector reduces port strain and fits perfectly in compact builds. Ideal for Raspberry Pi...

USB 2.0 to Micro USB Cable - A to Right Angle Micro B - 6" (15 cm) - Black Power your Raspberry Pi 3/Zero or any Micro-B USB devices with this mini cable. Specifications Connector A: USB Type-A (4 pin) USB 2.0 Connector B: Right Angle...

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the Adafruit breakout/dev board mounting...

Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have for your workstation. You'll have more than enough screws, nuts, and hex standoffs to construct your maker projects for days on end! M2.5 screws fit nearly all of the Adafruit...

Waveshare 13891 - 1.44inch LCD display HAT for Raspberry Pi, 128x128 pixels, SPI interface - 1.44inch LCD HAT This is an LCD display HAT for Raspberry Pi, 1.44-inch diagonal, 128x128 pixels, with embedded controller, communicating via SPI...

The Raspberry Pi Official Keyboard includes three host USB ports for connecting external devices, such as USB mice, USB drives, and other USB-controlled devices.The product’s micro USB port is for connection to the Raspberry Pi. Via the USB hub...