Breakouts & Modules

Throw out all those Mini and Micro B USB cables you have in a plastic bin - the next generation of USB connectors is here with USB C! You will start to see these connectors pop up on all sorts of...

The Kitronik Round Side Illumination LED Module is a pre-built board, designed for low-power lighting displays, such as desk lamps, accent lights, and illuminated signs. It has been designed such...

This two channel relay module is ideal for switching low voltage AC and DC loads. It is compatible with 3.3V and 5V microcontroller boards such as Arduino, Raspberry Pi Pico and ESP32. Features 2...

If your project is moving a lot of power around, and efficiency is key, an Adafruit LM73100 Ideal Diode breakout is a great way to keep your power budget tidy! As long as your power supply is 3~23V...

Adafruit 6354 - TPS61169 Constant Current Boost Converter for LEDs The Adafruit Constant Current Boost Converter for LEDs makes driving LEDs easy, whether they're in series or parallel - with a chip...

Adafruit 4694 - SHARP Memory Display Breakout - 2.7" 400x240 Monochrome The Adafruit 2.7" 400x240 SHARP Memory Display Breakout is a chonky cross between an eInk (e-paper) display and an LCD. It has...

The INA237 is an amazing power monitoring chip, with best-of-everything support: up to 85VDC common-mode, high or low side measurements, 16-bit ADC for precision measurements from milliamp to Amp,...

Adafruit 6335 - OPT4048 Tri-Stimulus XYZ Color and Lux Sensor  The Adafruit OPT4048 Tri-Stimulus XYZ Color, Light Temperature and Lux Sensor is a modern take on the common 'RGB' color sensor: this...

Pimoroni PIM770 - Add a hardware volume control dial to Picade Max USB Audio. Picade Max Encoder is a small board with a digital rotary encoder conveniently pre-attached. Connect it up to the...

8086 Consultancy - USB-C/PWR Splitter, no Barrel The adaptor allows the Raspberry Pi 4/5 to be used with a Pi USB-C power supply whilst allowing access to USB 2 OTG data over a separate USB-C...

Adafruit TLV320DAC3100 - I2S DAC with Headphone and Speaker Out - Product ID: 6309 Adafruit stock a lot of chips and development boards that are able to do high quality digital I2S out, which makes...

Adafruit 6310 - Adafruit ANO Rotary Navigation Encoder to I2C Stemma QT Adapter - Pre-Soldered Encoder The ANO rotary encoder wheel is a funky user interface element, reminiscent of the original...

Adafruit TPS65131 Split Power Supply Boost Converter - +6~15 / -6V~-15V - 6280 Need those tricky split-rail voltages for your vintage electronics? The Adafruit TPS65131 Split Rail Boost...

Pimoroni PIM730 - Add 2.4GHz wireless and Bluetooth functionality to an existing project with this handy breakout featuring Raspberry Pi's RM2 module. RM2 uses the same two-in-one wireless and...

SparkFun GPS Breakout - NEO-M9N, SMA (Qwiic) - GPS-17285This product requires an antenna The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options...

Sparkfun BOB-11189 - SparkFun Transceiver Breakout - MAX3232 The 'must have' IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at...

SparkFun Qwiic Power Switch - PRT-26784Sometimes you wish you could switch something off to save power, and the SparkFun Qwiic Power Switch (QPS) allows you to do that! The SparkFun Qwiic Power...

Keep your project powered up during power supply hot swaps with the SparkFun Ideal Diode Breakout. This compact (15.2mm x 12.7mm) breakout board features four channels and ground connections,...

The SparkFun Qwiic Directional Pad adds a 5-way directional pad to your I2C bus! When connected to a microcontroller, press down on the directional pad (up, down, left, right, or center) to provide...

The SparkFun Soft Power Switch is a passive, hard on/off switch with software feedback and control. In other words, it's like a laptop on/off switch. A simple press will turn the system on. Another...