This is a 10 Pack of 560 Ohms Resistors. 560 Ohms ±5% 0.25W, 1/4W through hole resistor with flame retardant coating and a safety carbon film. Datasheet

Need some really bright LEDs? We are big fans of these white LEDs. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add that extra zing to your project. Pack of 25 white LEDs 5mm diameter Cool white...

RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are weatherproof and rugged. There are four flanges molded in so that you can 'push' them...

Infrared LEDs are used for remote controls (they're the little LED in the part you point at your TV) and 'night-vision' cameras, and these little blue guys are high powered ones! They are 940nm wavelength, which is what nearly all devices listen to...

These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector. They are good for whenever you have 4 wires you want to be able to plug and unplug...

The IS31FL3731 will let you get back to that classic LED matrix look, with a nice upgrade! This I2C LED driver chip has the ability to PWM each individual LED in a 16x9 grid so you can have beautiful LED lighting effects, without a lot of pin...

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller. To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It...

For advanced DotStar LED fans, Adafruit now has a bendable, Flexible 16x16 Dotstar LED Matrix! Control all 256 ultra-bright LEDs using only two microcontroller pins, set each LED as you wish to scroll messages or draw little images. This matrix has...

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket. Each shell comes with a two-part snap plastic shell and a proper...

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front...

Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn't know how? Well, here's how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the ¾" threaded inlet and it will...

This product includes ONLY one CC2530 module, while at least two CC2530 modules are required to setup a ZigBee network. Overview Core2530 is a ZigBee module based on CC2530F256, and the extension interface is compatible with XBee. Basically...

The RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent. RPi Relay Board Features Supports Raspberry Pi A+/B+/2B/3B High quality relays, loads up to...

This is a resistive analog joystick, very similar to those found on the PSP1000. These compact joysticks are different in that they have a very interesting €˜slide' feeling. For wiring this part, if you look at the device from...

Desciption : This module is precise, small and ultra-low power consumption is 3μA. It can be used in mobile devices.It boasts of good performance and the lowest absolute accuracy it can achieve is 0.03hPa. BMP180 makes use of the powerful 8-pin...

The ML8511 sensor breakout is an easy to use ultraviolet light sensor. The MP8511 UV Sensor outputs an analog signal in relation to the amount of UV light it detects. This can be handy in creating devices that warn the user of sunburn or detect...

Description: Bosch has stepped up their game with their new BMP280 sensor. An environmental sensor with temperature. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! This precision sensor from Bosch is the...

These Sensor might come in different colors other than blue DC 6-36V NPN 3-wire 8mm Inductive Proximity Sensor Switch Detector LJ18A3-8-Z/BY Product Description Metal shell, DC type, 8mm detecting distance, 3 wire system. Power supply inverted...

650nm 5V Laser Diode Laser Transmitter Module Product Description - Operating voltage: 5V - Size: 15 * 24 mm - Source wavelength: 650 nm - Weight: 2.2 g - Laser head sensor module KY-008

Snow Rain Sensor Module Weather Sensor Humidity Sensor Module For Arduino Product Description 1.Product use: rain, rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO. 2.The sensor USES the high...