Universal Tilt-Adjustable Mount for Raspberry Pi HQ Camera
This larger version of the Tilt-Adjustable Raspberry Pi Camera mount allows for mounting the new Raspberry Pi High Quality Camera.
The Universal Tilt-Adjustable Camera Mount for the Raspberry Pi attaches directly to the Raspberry Pi case for an easy and clean solution to point your PiCam wherever you want. Compatible with the hole pattern of the Raspberry Pi HQ Camera as well as the Camera Module v1 and v2. Does not obstruct any of the port slots in the RPi case. Made out of clear acrylic.
- Mounting surface: 1.5" / 38mm x 2" / 50mm
- Height: 2.5" / 64mm
- Width without camera module attached and tilted horizontally: 1.6" / 40mm
See picture of disassembled mount. Includes the two acrylic parts, all bolts, nuts, spacers, screws, double stick tape and assembly instructions. Does NOT include camera module, Raspberry Pi circuit board nor RaspberryPi enclosure.
Tools required for assembly (not included)
- Small Phillips screwdriver (PH0)
- 2mm Metric Hex Key
- Pliers to hold the nut while tightening