Mini Dual Gigabit Ethernet Mini-Computer Kit for Raspberry Pi Compute Module 5

Waveshare 31073 - Mini Dual Gigabit Ethernet Base Board / Mini-Computer Kit Designed for Raspberry Pi Compute Module 5 (NOT Included), For All Variants Of CM5

Specifications

Precise cut-out with clear label

Eeach cut-out is completely aligned with the connector

1. Comes with anti-slip rubber (unassembled)
2. PSW button, for system power ON/OFF control without frequent plugging and unplugging of the power supply
3. Antenna connector, for connecting the antenna to build a wireless router
4. BOOT button, for setting the programming mode
5. LED indicator for monitoring the working status of the system
6. TF card slot, precise cut-out with clear label 

Magnetic Design

Adopts Magnetic removable top with location columns, easy to fix and better protection for the GPIO pins.

Assembly Guide

1. Remove the bottom screws then the bottom panel.

2. Gently push the Ethernet port and take out the CM5 mini base board.

3. Paste the thermal tapes on the front and back sides of the CM5, then install the CM5 to the base board

4. Install the base board to the metal case, fix the bottom panel, then insert the TF card and power on.

What's On Board

1. 40PIN GPIO header
   for connecting sorts of HAT
2. CM5 socket
   suitable for all variants of Compute Module 5
3. PSW button
4. BOOT button
5. RTC battery header
   for connecting rechargeable RTC battery
6. FAN header
   for connecting cooling fan, allows speed adjustment and measurement
7. RJ45 Gigabit Ethernet ports
   Dual RJ45 Gigabit Ethernet ports, 10/100/1000M compatible
   ETHERNET 0: CM5 original network port
   ETHERNET 1: PCIe extended network port
8. USB3.2 Gen1 Type-A port
   for connecting sorts of USB devices
9. Type-C port
   5V power supply, or used for eMMC programming
10. TF card slot
    for connecting a TF card with pre-burnt image (Lite variant ONLY)
11. RTL8111H
    Gigabit NIC chip
12. SYSTEM switch
    EEPROM_WP: Prevent EEPROM from being overwritten
    WiFi_DIS: WiFi disabled, only for CM5 versions with wireless
    BT_DIS: Bluetooth disabled, only for CM5 versions with wireless
13. Indicators
    Red light: indicating the power supply status of Raspberry Pi
    Green light: indicating the working status of Raspberry Pi

Outline dimensions

WIKI: www.waveshare.com/wiki/CM5-DUAL-ETH-MINI

Package Content 

1. CM5-DUAL-ETH-MINI + metal case (assembled) x1
2. Thermal tape 5PCS x1
3. Black thermal tape x1
4. Black anti-slip rubber 4PCS x1
5. 27W power adapter x1
6. Screwdriver x1