Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. Raspberry Pi Zero not included If your soldering isn't quite up to scratch, or you just don't...

If you're looking for the most compact li'l display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit 128x32 PiOLED is your little OLED pal, ready to snap onto any and all Raspberry Pi...

Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank! Inspired by Alex Ellis' work with his Raspberry Pi Zero Docker Cluster, we developed these boards for him to...

Nylon Standoffs - M2.5x12mm - Pack of 4 - Black

HDMI Mini (type C) connectors are used for connecting HDMI equipped portable devices such as high definition camcorders. This cable will allow you to connect your portable device to the standard HDMI connector (type A) found on most televisions and...

Hey, listen up! It's the world's smallest USB microphone! OK maybe it's not in the Guinness Record Book, but it is pretty darn small! This plug-and-play Mini USB Microphone needs no driver, and its USB interface means you can use it with...

The Raspberry Pi camera module comes with its own 30cm cable to connect to the Pi, but sometimes that's simply not long enough. This lovely little board lets you add extension cables to your existing camera cable, giving you as much range as you'll...

We tried several standoff kits before we chose this high quality set as our go-to. The metal hardware threads together cleanly, and the tall standoffs and nuts can be easily attached with your fingers, and then optionally tightened with tools. This 12mm...

The MCP23017 pHAT from ModMyPi  and BuyaPi.ca is the perfect I/O expansion pHAT for your Raspberry Pi Zero. The pHAT features a single removable MCP23017 DIP IC, which utilise two i2c pins (which can be shared with other devices if...

The Zero Stem is a PCB shim that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub without any additional cables or power supplies. The Zero Stem is compatible...

Now that we're carrying the Pi Zero, PaintYourDragon is back with another gorgeous laser-cut masterpiece. This time he's taken a pass at a Pi Protector for Raspberry Pi Zero, not quite a full case, it will keep your Pi Zero safe and svelte...

A Raspberry Pi Zero and Pi Zero W (abbreviated here as PiZ) is a small size computer tethered to the wall power outlet. It needs the power via the micro-USB cable to operate. When PiZ needs to be moved from one location...

PiZ-EzConnect KIT allows you to customize and build your own GPIO connector for a Raspberry Pi or a Pi-clone (e.g. Asus Tinker, PiOrange etc.) All 40 pins used by the Raspberry Pi are exposed. Soldering is required. KIT includes...

Having a discrete, slick, and tidy power supply is always tricky when taking a project on the go...but get ready to roam the earth worry free with the tiny little Pimoroni Zero LiPo! It aims to give you the most compact power supply possible...

Overview This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great...

Waveshare 12694 - 4 Port USB HUB HAT for Raspberry Pi Overview This is a 4 port USB hub for Raspberry Pi, provides more USB capability to your Pi, what's more, it features USB to UART converter for easy serial communication. It can work with...

The Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi! A more diminutive version of the popular Explorer Hat Pro, it's cheaper and designed to fit perfectly on a Raspberry Pi Zero! Pimoroni have added a heap...

The Serial Hat from PiShop.ca features a standard Male DE-9 RS232 port connected to the Pi's UART pins via a MAX3232 IC. The MAX3232 IC converts the Pi's UART port to RS232, which enables serial communication with any RS232 compatible serial...

This camera cable is specifically designed to work with the Raspberry Pi Zero v1.3 and Zero W! Just plug it into your Pi Zero's camera port and then the other end into one of the official Pi Cameras (V1, V2, NoIR V1, NoIR V2) for photo & video joy...

Highlights 2.4Ghz Wireless Multimedia Keyboard and mouse set.Hot keys customized for Windows keep access to applications and media controlPlease note:The USB receiver is inserted in the back cover of the keyboard. 2.4G Wireless delivers up to 10 meters...