Remote infrared sensors are unique in their ability to measure something they are pointed at, but not touching, and we've been looking for a replacement for the now-discontiued TMP007 for a few years. The Adafruit MLX90632 FIR Temperature...

Waveshare 11092 - Temperature-Humidity Sensor, DHT22 Onboard This is a calibrated digital temperature and humidity module with onboard sensor DHT22, which features higher accuracy and wider measuring range than DHT11. It can be used for...

Adafruit 6362 - Simple Soil Moisture Sensor - For micro:bit, and more Perfect for educational uses, the Adafruit Simple Soil Moisture Sensor is low cost, and easy to use. This is a simple resistive style moisture sensor, where...

Adafruit 6335 - OPT4048 Tri-Stimulus XYZ Color and Lux Sensor  The Adafruit OPT4048 Tri-Stimulus XYZ Color, Light Temperature and Lux Sensor is a modern take on the common 'RGB' color sensor: this time with true "CIE" XYZ output so...

Waveshare 16115 - BMP388 High Precision Barometric Pressure Sensor, Altitude / Barometric Pressure / Temperature Measuring, I2C/SPI Interface This is a 24-bit high precision barometric pressure sensor, which allows accurate altitude tracing,...

Pimoroni PIM769 - This super-smart Bosch sensor measures temperature, pressure and humidity precisely. It also has an AI-enhanced gas scanner function. Like previous sensors in the BME6XX series, this high quality sensor can be used to monitor...

SparkFun SEN-26554 - Measure air quality with unprecedented precision and size using the SparkFun Qwiic BMV080 sensor, the world's smallest PM1/PM2.5/PM10 detector. The SparkFun Qwiic Particulate Matter Sensor features Bosch’s BMV080—the...

With this USB breakout, you can incorporate a USB-C connector into your projects without needing to solder each tiny SMD pad. The SparkFun USB-C Breakout supplies up to three times the power as previous USB iterations. Also, it solves the universally...

Pimoroni PIM745 - A 3-in-1 super sensor suite for environmental, light and movement sensing, with Qw/ST for easy, solderless connectivity. We heard you like sensors (we definitely like sensors!). So we combined three of our favourite ones into...

Waveshare 26536 - Human Micro-Motion Detection MmWave Sensor, 24GHz MmWave Radar, Based On S3KM1110, Adopts Frequency Modulated Continuous Wave (FMCW) Technology, Compact Size And Easy Integration Features The HMMD-mmWave-Sensor is a human...

A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino-compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a wide detection...

Behold, the ST LSM6DSOX: The latest in a long line of quality Accelerometer+Gyroscope 6-DOF IMUs from ST. This IMU sensor has 6 degrees of freedom - 3 degrees each of linear acceleration and angular velocity at varying rates within a respectable range...

Waveshare 9522 - Hall Sensor The Waveshare Hall Sensor delivers reliable magnetic field detection for microcontroller projects. It uses a 49E sensor with an LM393 comparator for clean digital switching and analog readout. Sensitivity is...

Take a deep breath in...now slowly breathe out. Mmm isn't it wonderful? All that air around us, which we bring into our lungs, extracts oxygen from and then breathes out carbon dioxide. CO2 is essential for life on this planet we call Earth - we and...

Add high-quality motion, direction, and orientation sensing to your Arduino project with this all-in-one 9 Degree of Freedom (9-DoF) sensor with sensors from ST. This little breakout contains two chips that sit side-by-side to provide 9 degrees of...

Breathe easy, knowing that you can track and sense the quality of the air around you with the PM2.5 Air Quality Sensor with Breadboard Adapter particulate sensor. Mad Max & Furiosa definitely should have hooked up one of these in their truck...

Add heat-vision to your project with an Adafruit AMG8833 Grid-EYE Breakout! This sensor from Panasonic is an 8x8 array of IR thermal sensors. When connected to your microcontroller (or raspberry Pi) it will return an array of 64 individual infrared...

This is a wind speed sensor with a rain-proof design. It has a standard connector for Octopus brick series products. We can use it to test wind speed. It adopts three half-sphere bowls with a 6CM diameter, presenting 120 degrees branch installation...

PIR sensors are used to detect motion from pets/humanoids from about 5 meters away (possibly works on zombies, not guaranteed). This sensor is much smaller than most PIR modules, which makes it great for unobtrusive projects. It's also fully-contained -...

Take your next outdoor sensor project to the next level with this SHT-30 based temperature/humidity sensor. The sensor includes a dual-use sensor module from Sensirion in a sintered metal mesh encasing. The casing is weatherproof and will keep water from...