Make a scrolling sign, or a small video display with this 8x8 gridded pixel white LED matrix. Only 1.2" on a side, it is quite visible but not so large it won't plug into a breadboard! There are 16 pins on the side, 8 on each, with 0.1" spacing so...

These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may...

100 assorted through-hole LEDs: 10x red, 5mm 10x red, 3mm 10x green, 5mm 10x green, 3mm 10x blue, 5mm 10x blue 3mm 10x yellow, 5mm 10x yellow, 3mm 10x white, 5mm 10x white, 3mm

LEDs are NOT included Keep your 10mm LEDs in place with these little plastic LED holders. These are handy for projects using individual LEDs as they look sleek, and your LED won't budge. Slot the LED through the opening and you'll get a nice *snap* into...

RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a 'dot' of silicone. The dots are weatherproof and rugged. There are four flanges molded in so that you can 'push' them...

This is an inverter for EL wire and tape, similar to our pocket inverters, except it is a brick that takes 12V input instead of 2 AA batteries. This means its good for 'fixed' installations since you can just plug it into a 12V wall adapter. It's also...

Compatible with the JustBoom Amp HAT and JustBoom Amp Zero. This 60W to 65W 15v power supply has a 100-240VAC input and comes supplied complete with UK, European, USA and Australian pins as standard. This carries full international safety approvals...

After a long day out harvesting in the terminal block fields, we've returned with a veritable bounty of these very nice and compact 2.54mm/0.1" terminal blocks in a variety of sizes. Our harvest of terminal blocks is great news since nothing makes...

24V 3.3A Power Supply, 5.5x2.1mm DC Jack - US - Black - UL Listed Perfect for LED Strips, Wireless Routers, HUBs, Switches, Security Cameras, and Audio/ Video. Specifications Input voltage: 100~240VAC / 50/60Hz Output voltage: 24V Output...

This 25mm 5MP Lens is compatible with the Raspberry Pi HQ camera. Thanks to its fixed iris and the special optics construction, sharp focus is achievable at a 30cm focal distance and higher with this lens. FEATURES Incredible depth of field...

Creality SKU: 6004110003 Strong wind force and low power consumption Wide compatibility with all Creality 3D printers Compatible Model CR-6 SE

Raspberry Pi 48W Power Supply for Build HAT - White - US Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO® TechnicTM motors, as...

This gearmotor is a miniature high-power, 6 V brushed DC motor with a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Key...

This 50mm 2MP Lens is compatible with the Raspberry Pi HQ camera. Thanks to its manual iris and the special optics construction, sharp focus is achievable at a 30cm focal distance and higher with this lens. FEATURES Incredible depth of field for...

Waveshare 11189 - 5inch Resistive Touch Screen LCD with Bicolor Case, 800×480, HDMI, Low Power Consumption - 5inch HDMI LCD (with bicolor case) Specifications Size: 5 inch Resolution: 800×480 Display...

Maximum Compatibility The RPI ADC Hat is compatible with models 2B, 3B, 4B, zero w, w2 and even the 400. All GPIO pins are free for other uses. You can even add another hat first and add the RPI ADC hat on top.  What if there is no room in the...

Connect your Pi or any Blu-Ray player, Satellite Box, Cable Box, DVD Player, Media Player, or ANY device accepting the standard HDMI connector.

This 6mm 3MP Lens is compatible with the Raspberry Pi HQ camera. Thanks to its manual iris and the special optics construction, sharp focus is achievable at a 30cm focal distance and higher with this lens. FEATURES Incredible depth of field - Most of...

Waveshare 20806 - 7inch Capacitive Touch Display For Raspberry Pi, With 5MP Front Camera, 800×480, DSI Interface Device & System Support Raspberry Pi Supports Raspberry Pi OS, 5-points touch, driver free Supports Ubuntu, single point...