8086 Consultancy - USB-C/PWR Splitter, no Barrel The adaptor allows the Raspberry Pi 4/5 to be used with a Pi USB-C power supply whilst allowing access to USB 2 OTG data over a separate USB-C connection (USB3 data is not connected/passed through). USB...

USB Type-C to USB 2.0 Micro-B Cable - 5FT

Share a USB 3 device between two hosts or switch between two devices on one host. The bidirectional USB 3 Mux allows either a single USB device (or multiple devices when using a USB hub) to be switched between two USB hosts (computer) or using its...

USB3 Power Switch - Logic Level DefaultTurn your USB3 devices on/off using a switch or Pi/Pico/Arduino/etc. The USB3 Power Switch is available in two models, Logic Level (LL) and Open Drain (OD). You can switch between either model by altering the...

The USB Switch/Multiplexer allows a USB device (or multiple devices if connected via a USB hub) to be switched between two hosts, or powered off. This newer 4-pin version adds a 3.3V output which can be used to toggle the state using switches without the...

The 8086 USB-USB NULL Modem (UUNM) is a back-to-back USB to Serial converter using USB CDC Serial - meaning drivers are already built in to most modern operating systems (Linux/Windows 10/Mac OS X/Android) so you can just plug n' play! Users The...

USB Type-C to USB Type-C Cable - USB 3.2 Gen 2 - 3FT (1 meter) - Black This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4, Raspberry Pi 5, and other USB Type C boards.  Specifications Connector A: USB...

3.5mm Premium Mini-Stereo TRS Male to 2RCA Male Cable, Gold Plated, 22AWG

Compatible with the Raspberry Pi. Tip is Left Ring1 is Right Ring2 is Ground Sleeve is Video

USB 2.0 to Micro USB Cable - A to Micro B - 6" (15 cm) - Black Power your Raspberry Pi Zero or Pico or any Micro-B USB devices with this mini cable. Specifications Connector A: USB Type-A (4 pin) USB 2.0 Connector B: USB Micro-B (5...

Power two devices from a single micro USB supply. Connects power from a single Micro USB connector to the Dual Female USB Type A connector. Micro USB data lines are connected to the lower USB port. Please Note: FOR USE ONLY WITH 5 VOLT supplies and...

Cat6 Ethernet Patch Cable - Snagless RJ45, Stranded, 550Mhz, UTP, Pure Bare Copper Wire, 24AWG, 10ft, Black Save the time and hassle of building Ethernet cables by using these fixed-length UTP Cat6 Ethernet Network Cables! Features Unshielded Twisted...

USB A-Male to USB Micro-B Cable - 3ftPerfect for Micro:bit and some Arduino boards!

HDMI Cable, Gold Plated - 3ft

The adaptor allows the Raspberry Pi 4 to be used with a Pi USB-C power supply (or DC barrel jack) whilst allowing access to USB 2 OTG data over a separate USB-C connection (USB3 data is not connected/passed through). USB Type-C (DATA POWER) <> USB...

The kit contains the following connector boards and pin headers. QtyTypeGender 2 Micro USB Male 2 Micro USB Female 2 USB Type-A Male 2 USB Type-A Female 4 - 6way long pin header Of the 6 pins on the...

The adaptor allows the Raspberry Pi 4 to be used with a Pi Micro USB power supply (or DC barrel jack) whilst allowing access to the OTG USB. USB Type-A (data and power) <> USB Data (Micro USB) and Power (Micro USB/Barrel jack). USB Type AMicro...

USB 3.0 SuperSpeed adapters are a great way to quickly change the connection type or gender of an existing USB cable. This adapter has USB Type C Male opposite USB 3.0 Type A Female.  Features Connector A: USB Type C Male Connector B: USB...

USB Type-C to USB 3.0 A-Male Cable - 5FT

USB Type-C to USB 2.0 A-Male Cable - 5ft