Heat shrink is the duct tape of electronics which I guess makes this heat shrink the colorful and exciting duct tape they sell at craft stores. This heat shrink comes in six different colors - red, blue, green, yellow, white and the traditional...

By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the other end has a matching plug. Between the two, 500mm of color coded wire...

This cable is a little unusual, rather than having a USB A plug on one end, it has two Micro B USB connections! What is this for? It's for when you have a "USB On-The-Go (OTG)" device, and you want to plug in another USB device. For example, a Pi Zero or...

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables, then swap and switch any of the HDMI...

This handy USB extension cable will make it easy for you to enclose a device that has a mini-B USB type port. This would be most handy when putting a Teensy, FTDI friend, USB LiPo charger, USB Boarduino, etc into a box! The jack half has two mounting...

If you're looking to make a custom cable with any two of Adafruit's HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables, then swap and switch any of the...

These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector. They are good for whenever you have 4 wires you want to be able to plug and unplug...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab an HDMI ribbon cable, then swap and switch any of our HDMI adapters on each end using the flex cable clips...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab an HDMI ribbon cable, then swap and switch any of our HDMI adapters on each end using the flex cable clips...

uFL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. We use this part on our GPS and WiFi boards, they're great! Chances are your antenna doesn't use uFL as...

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket. Each shell comes with a two-part snap plastic shell and a proper...

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on...

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. Adafruit thinks this would be most useful when putting a Beagle Bone, Raspberry Pi, or Arduino Ethernet into a box. The jack half has two...

Check out this handy MicroUSB extension cable, which will make it easy for you to enclose a device that has a B type (micro USB host) port. Great if you need to extend the USB port for your Raspberry Pi, Arduino, Feather or really anything...

This panel mount extension cable will allow you to extend an HDMI connection and secure it to an enclosure. Perfect for placing your Raspberry Pi in a secure box. Two #4-40 screws are used to attach the female socket end, 26.9mm apart. Two hex-body...

Make your own custom HDMI cable or HDMI interface with ease, using this HDMI Plug to Breakout. You get a nice solid PCB with an HDMI plug and through hole pads that you can solder to assemble your own wiring jigs. You can add in some terminal blocks to...

Make your own custom HDMI cable or HDMI interface with ease, using this HDMI Terminal Block Breakout. You get a nice solid PCB with an HDMI plug and two strips of terminal blocks that you can use with stranded or solid core wire to quickly assemble your...

Make your own custom HDMI input or HDMI interface with ease, using this HDMI Socket to Terminal Block Breakout. You get a nice solid PCB with an HDMI socket and two strips of terminal blocks that you can use with stranded or solid core wire to assemble...

Make your own custom HDMI input or HDMI interface with ease, using this HDMI Socket Breakout. You get a nice solid PCB with an HDMI socket that you can solder to assemble your own wiring jigs. You can add in some terminal blocks to make the wiring...

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on...