Waveshare 24964 - 8-ch Ethernet Relay Module, Modbus RTU/Modbus TCP Protocol, PoE port Communication, With Various Isolation And Protection Circuits, Industrial Grade Rail-mount Case Features This product is an industrial 8-ch relay module...

Waveshare 27928 - 30-Ch Ethernet Relay Module, Modbus RTU/Modbus TCP Protocol, PoE Port Communication, With Various Isolation And Protection Circuits, Industrial Grade Rail-Mount Case Features This product is an industrial 30-ch relay module...

Waveshare 30915- Mini Dual Gigabit Ethernet Base Board / Mini-Computer Kit Designed for Raspberry Pi Compute Module 5 (NOT Included), For All Variants Of CM5 Specifications  CM5 socket suitable for all variants of Compute Module...

Waveshare 31073 - Mini Dual Gigabit Ethernet Base Board / Mini-Computer Kit Designed for Raspberry Pi Compute Module 5 (NOT Included), For All Variants Of CM5 Specifications CM5 socket suitable for all variants of Compute Module...

Waveshare 23929 - Industrial grade USB HUB, Extending 4x USB 3.2 Ports, Switchable dual hosts, Multi Protections Features 4x extended USB ports, switchable two inputs, sharing USB devices for two hosts Industrial grade HUB chip, adopting...

8086 Consultancy - USB-C/PWR Splitter, no Barrel The adaptor allows the Raspberry Pi 4/5 to be used with a Pi USB-C power supply whilst allowing access to USB 2 OTG data over a separate USB-C connection (USB3 data is not connected/passed through). USB...

Share a USB 3 device between two hosts or switch between two devices on one host. The bidirectional USB 3 Mux allows either a single USB device (or multiple devices when using a USB hub) to be switched between two USB hosts (computer) or using its...

USB3 Power Switch - Logic Level DefaultTurn your USB3 devices on/off using a switch or Pi/Pico/Arduino/etc. The USB3 Power Switch is available in two models, Logic Level (LL) and Open Drain (OD). You can switch between either model by altering the...

Waveshare 25919 - Industrial Grade 2-Ch CAN To Ethernet Server, 2-Ch CAN + RS485 + Ethernet Port, CAN Repeater / CAN To RS485, Dual SOCKET, Aluminium Alloy Case, Wall-Mount Support - 2-CH-CAN-TO-ETH The Waveshare industrial-grade 2-CH CAN...

The USB Switch/Multiplexer allows a USB device (or multiple devices if connected via a USB hub) to be switched between two hosts, or powered off. This newer 4-pin version adds a 3.3V output which can be used to toggle the state using switches without the...

The 8086 USB-USB NULL Modem (UUNM) is a back-to-back USB to Serial converter using USB CDC Serial - meaning drivers are already built in to most modern operating systems (Linux/Windows 10/Mac OS X/Android) so you can just plug n' play! Users The...

Waveshare 17286 - Industrial USB To RS485 Bidirectional Converter, Onboard Original FT232RL And SP485EEN - USB TO RS485 Industrial USB to RS485 bidirectional converter with original FT232RL and SP485EEN chip. Due to its stable communication,...

Waveshare 20275 - DSI FFC Flexible Flat Cable 15cm DSI Flexible Flat Cable 15cm 22Pin To 15Pin Black EMI Shielding Film On Both Sides, Enhancing Anti-Interference Performance More Stable Signal...

Waveshare 15817 - USB To RS232/485/TTL Interface Converter, Industrial Isolation This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power isolation, ADI magnetical...

Waveshare 21358 - USB-C Adapter For NGFF M.2 SSD, USB3.2 Gen2 Type-C Note that this adapter is ONLY for SATA M.2 SSDs. NVMe IS NOT supported! Features M.2 NGFF Protocol Support High-speed Transfer USB-C Connector: Transforming Your M.2 SSD Into...

Power two devices from a single micro USB supply. Connects power from a single Micro USB connector to the Dual Female USB Type A connector. Micro USB data lines are connected to the lower USB port. Please Note: FOR USE ONLY WITH 5 VOLT supplies and...

The adaptor allows the Raspberry Pi 4 to be used with a Pi USB-C power supply (or DC barrel jack) whilst allowing access to USB 2 OTG data over a separate USB-C connection (USB3 data is not connected/passed through). USB Type-C (DATA POWER) <> USB...

The kit contains the following connector boards and pin headers. QtyTypeGender 2 Micro USB Male 2 Micro USB Female 2 USB Type-A Male 2 USB Type-A Female 4 - 6way long pin header Of the 6 pins on the...

The adaptor allows the Raspberry Pi 4 to be used with a Pi Micro USB power supply (or DC barrel jack) whilst allowing access to the OTG USB. USB Type-A (data and power) <> USB Data (Micro USB) and Power (Micro USB/Barrel jack). USB Type AMicro...

USB To TTL, With Embedded Convertor - NOT COMPATIBLE WITH WINDOWS 11 USB to TTL 4-pin Wire specification: Embedded convertor: PL2303 Supports windows XP/7/8/8.1/10/... Connector: USB Type-A plug, 4-pin 2.54mm pinheader Pinout: Red - VCC...