The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection,...

This color sensor module uses the new TCS3200 chip, the better upgraded version of TCS230. TCS3200 is a static object color detection chip which can output different frequency based on different color sensed and then MCU can read the RGB color via...

Product description : 1. PCB for single panel, size: 44 mm x 23 mm x 1.6 mm 2. With four positioning hole, a diameter of 3.1 mm 3. The spare battery for authentic celestial CR2032, voltage 3 v, current 260 mah, the rechargeable battery. 4. DS1302...

This kit is Arduino compatible. It was designed to be used with your Arduino. It contains everything needed for a first-time user to connect their computer to Arduino and includes many of the most popular accessories for DIY projects. Breadboard, Jumper...

Specifications Cable Length: 3.3 inch Keypad Width: 2.7 inch Keypad Length : 3.0inch Number of keys: 16 Matrix: 4x4 Related Links Arduino Keypad Tutorial

The SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the other peripherals you'll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger...

The SN74HC595N is a simple 8-bit shift register IC. Simply put, this shift register is a device that allows additional inputs or outputs to be added to a microcontroller by converting data between parallel and serial formats. Your chosen microprocessor...

The Arduino Shield converts the footprint and pins of your Photon or Core into that of an Arduino, allowing for use of existing Arduino shields and accessories. This shield converts the pin mapping of the Core to the Arduino pin layout and provides a...

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with...

This board is used for testing the soft-serial interface of MicroHOPE. It can be used as a general purpose USB to Serial Converter.

This is an open sourced ISP (In-System Programming) programmer available from http://www.fischl.de/usbasp/.This is provided as an accessory to MicroHOPE due to several reasons. If you want to develop programs that uses the UART of Atmega32, you need to...

The Arduino Starter Kit is a great way to get started with Arduino, coding and electronics! The Starter Kit includes the components you need to make 15 fun projects following the step-by-step tutorials on the Project Book. It walks you through...

The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple...

Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane material with an adhesive backing (just remove the paper) so you can attach it to nearly...

How could something so simple be so useful? We heard once that in the 4th millenium B.C. some guy asked the person who invented the wheel that question.  The person who invented the wheel's answer, we were told, was something like "Well...

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes...

The original Adafruit Motorshield kit is one of our most beloved kits, which is why we decided to make something even better. We have upgraded the shield kit to make the bestest, easiest way to drive DC and Stepper motors. This shield will make quick...

5V Four Channel SSR Solid Relay Module 240V / 2A - High Level Trigger - For Arduino Specifications Max. LoadAC: 240V Input Voltage: 5V DC Trigger Current: 2mA Dimensions: 2.28 in x 2.2 in x 0.94 in (5.8 cm x 5.6 cm x 2.4 cm) Weight: 1.34 oz (38 g)

This Wifi Shield board is based on Serial to Wi-Fi module Wizfi210 from Wiznet and it is compatible with Arduino and its clones. The Wifi Shield offers you a quick, easy, and effective way to add Wi-Fi capabilities to Arduino. The Wifi Shield...

This is a 5V 8-Channel Relay interface board able to control various appliances, and other equipment with large currents. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino,etc.). Features 5V 8-Channel Relay interface board,...