Categories - PiShop.ca

Sub Categories

This is a beefy switching supply, for when you need a lot of power! It can supply 5V DC up to 10 Amps, running from 110V or 220V power (the plug it comes with is for US/Canada/Japan but you can use any plug adapter for your country, or just replace the...

Add to Cart

Raspberry Pi Cobbler Plus

$2.95 $4.95

Designed for use with Raspberry Pi Model A+/B+/Pi 2/Pi 3/Pi 4 only! No soldering required!This Cobbler is in a compact shape, which is the least bulky way to wire up. The Cobbler can plug into any solderless breadboard (or even a...

Add to Cart

Waveshare Photosensitive IR Lamp Set For Night Vision Cameras

$19.95

This infrared lamp set fits Waveshare camera K and camera M, and is included with waveshare camera H and camera IR-CUT. Camera module is not included! Features Two 1W high power LED lamps Adjustable resistance and photosensitive resistance...

Notify Me

Raspberry B+/Pi2/Pi3 GPIO Extension Board Breakout Header Board with Ribbon Cable (T-Cobbler)

$0.00

This product has been discontinued and has been replaced by this alternative product: Raspberry Pi 3 T-Cobbler Breakout Kit Compatible with Raspberry B+, Pi 2 and Pi 3 All 40 pins GPIO pin breakout and labeled for easy prototyping Gold plated...

Notify Me

IFixit Jimmy - Electronics Opening Knife

$13.95

The all-mighty Jimmy from IFixIt is the best way out from an iRock and an iHardPlace. Slide, cut, twist, poke, slice, part, uproot, divide, lift, dissect, separate, and pry your devices to check out their insides, void your warranties,...

Notify Me

Raspberry Pi Sense HAT with Orientation, Pressure, Humidity and Temperature Sensors

$39.95

The Sense HAT is an add-on board for Raspberry Pi, made especially for the Astro Pi mission - it's going to the International Space Station in December 2015 - and is now available to buy. The Sense HAT has an 8x8 RGB LED matrix, a five-button joystick...

Notify Me

Official Raspberry Pi 7" Touch Screen Display SC0880

Raspberry Pi Touch Display

$85.95

Raspberry Pi Touch Display - The 7” touchscreen display for Raspberry Pi - SC1227 This seven-inch, 800 x 480 touchscreen display lets you create interactive Raspberry Pi projects like tablets, entertainment systems, and information dashboards...

Notify Me

EL wire starter pack - Pink 2.5 meter (8.2 ft)

$26.95

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Pink. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL...

Add to Cart

EL wire starter pack - Orange 2.5 meter (8.2 ft)

$26.95

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Orange. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL...

Notify Me

EL wire starter pack - Green 2.5 meter (8.2 ft)

$26.95

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Green. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL...

Notify Me

Waterproof DS18b20 Temperature Probe

$8.95

Sensor tip is 2" Chip: DS18B20; Voltage: 3.0~5.5V Temperature range: -55'C~+125'C (-67'F~+257'F) Output wires: Red(VCC), Yellow (DATA), Black(GND)

Notify Me

EL wire starter pack - Blue 2.5 meter (8.2 ft)

$26.95

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Blue. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL...

Add to Cart

EL wire starter pack - Yellow 2.5 meter (8.2 ft)

$14.95 $26.95

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in yellow. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL...

Notify Me

EL wire starter pack - Red 2.5 meter (8.2 ft)

$26.95

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Red. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter...

Notify Me

USB Powered Speakers

$13.95

Add some extra boom to your audio project with these powered loudspeakers. We sampled half a dozen different models to find ones with a good frequency response, so you'll get quality audio output for music playback. Simply connect the standard 3.5mm...

Notify Me

GPIO Header for Raspberry Pi - Extra tall 2x13 Female Header

$2.75

Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.5 mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This header has 3mm of pins, compared with...

Add to Cart

Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit - MPR121

$23.95

This touch-able add on HAT for Raspberry Pi will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes. Capacitive touch...

Notify Me

Analog 2-axis Thumb Joystick with Select Button + Breakout Board

$9.95

This mini-kit makes it easy to mount a PSP/Xbox-like thumb joystick to your project. The thumbstick is an analog joystick - more accurate and sensitive than just 'directional' joysticks - with a 'press in to select' button. Since it's analog, you'll need...

Add to Cart

Aluminum SMT Heat Sinks 10 Pack - 0.25"x0.25" x 0.15" tall

$5.95 $7.25

If you want to heat sink a SoC, motor driver, linear regulator, FET or other surface-mount package part, you might find yourself struggling to find a good heat sink. These little extra-small mini heat sinks are easy to use and give you an extra thermal...

Add to Cart

Simple X Axis Upgrade with Heated Bed - NEW VERSION

$0.00

This product is no longer available. Please consider other/alternative Printrbot products. Printrbot Simple V2 3D Printer is currently on end of year sale with 50% off! The Simple X Axis Upgrade increases the build volume of yourÂ Printrbot Simple to...

Notify Me