Categories - PiShop.ca

Sub Categories

Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731

$6.95 $8.95

The IS31FL3731 will let you get back to that classic LED matrix look, with a nice upgrade! This I2C LED driver chip has the ability to PWM each individual LED in a 16x9 grid so you can have beautiful LED lighting effects, without a lot of pin...

Add to Cart

Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE

$14.95

The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit...

Add to Cart

White LED Backlight Module - Large 45mm x 86mm

$5.95

These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light from below. Here, we've got the LEDs available individually and they're really cool! Each LED is...

Add to Cart

White Electroluminescent (EL) Tape Strip -100cm w/two connectors

$2.95 $10.95

CLEARANCE: You will need to use your own double-sided adhesive tape to install the strip. EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide...

Notify Me

Ultimate GPS Module - 66 channel w/10 Hz updates (MTK3339 chipset)

$35.95 $44.95

For those who want to integrate our awesome Ultimate GPS module into their own projects, we now have the raw sub-module available. Don't be fooled by it's small size, this is a very sensitive, high quality GPS module with all the extras you could want...

Notify Me

Super-bright 5mm IR LED (25 pack) (940nm)

$9.95

Infrared LEDs are used for remote controls (they're the little LED in the part you point at your TV) and 'night-vision' cameras, and these little blue guys are high powered ones! They are 940nm wavelength, which is what nearly all devices listen to...

Add to Cart

Short Feather Headers Kit - 12-pin and 16-pin Female Header Set

$1.95

These two Short Female Headers alone are, well, lonely. But pair them with any Adafruit Feather boards and you're in business! These headers are particularly cute and tiny with a body height of just 5.0 mm they are the best way...

Add to Cart

Proto-Screwshield (Wingshield) R3 Kit for Arduino

$23.95

The next generation Proto-ScrewShield is a dual-purpose prototyping shield. Not only does it have a large 0.1" grid prototyping area but it also extends the Arduino pins to sturdy, secure, and dependable screw terminal blocks. You even get a few...

Add to Cart

NTSC/PAL (Television) TFT Display - 3.5" Diagonal

$64.95

Yes, this is an adorable small television! The visible display measures only 3.5" (8.9cm) diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red (+) and black (-) wires, then connect a...

Notify Me

IR (Infrared) Receiver Sensor (TSOP38238)

$2.95

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller. To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It...

Add to Cart

HDMI 4 Pi: 7" Display w/Touchscreen 1024x600 w/ Mini Driver

$149.95

Make a lovely, touchscreen video setup with a 7" screen at 1024x600 resolution with a resistive touchscreen overlay! For this model, Adafruit tried to get an inexpensive 1024x600 display that was still high quality and would be good for...

Notify Me

HDMI 4 Pi: 7" Display no Touchscreen 1024x600 w/ Mini Driver

$99.95

Yes, this is a 7" TFT display with 1024x600 resolution and a cute little driver board. Adafruit tried to get the best medium-size display that would be good for embedded computing usage and at a good price. And they also tried to match it with a...

Notify Me

HDMI 4 Pi: 7" Display & Audio 1024x600 w/Touchscreen

$174.95

"Give me the works!" That's what Adafruit said when they put together this 7" screen at 1024x600 resolution, with a resistive touchscreen overlay AND with HDMI stereo speaker support! For this model, they tried to get an inexpensive...

Notify Me

HDMI 4 Pi 5" Display not Touchscreen 800x480 - HDMI/VGA/NTSC/PAL

$89.95

Yes, this is a cute little 5" TFT display with WVGA 800x480 resolution (NOT TOUCHSCREEN). Adafruit tried to get the smallest display that would be good for embedded computing usage and at a good price. The visible display measures 5" diagonal and is a...

Notify Me

Flexible Adafruit DotStar Matrix 16x16 - 256 RGB LED Pixels

$109.95 $129.95

For advanced DotStar LED fans, Adafruit now has a bendable, Flexible 16x16 Dotstar LED Matrix! Control all 256 ultra-bright LEDs using only two microcontroller pins, set each LED as you wish to scroll messages or draw little images. This matrix has...

Add to Cart

Adafruit LoRa Radio FeatherWing - RFM95W 900 MHz (RadioFruit)

$23.19

Add short-hop wireless to your Feather with these RadioFruit Featherwings. These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x's). These radios are good options for...

Notify Me

ESP32 WiFi-BT-BLE MCU Module / ESP-WROOM-32

$6.95 $10.95

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with...

Add to Cart

DIY HDMI Cable Parts - Straight HDMI Plug Adapter

$9.95

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab an HDMI ribbon cable, then swap and switch any of Adafruit's HDMI adapters on each end using the flex cable...

Add to Cart

DIY HDMI Cable Parts - Right Angle (R bend) HDMI Plug Adapter

$9.95

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab an HDMI ribbon cable, then swap and switch any of our HDMI adapters on each end using the flex cable clips...

Add to Cart

DIY HDMI Cable Parts - Right Angle (L Bend) Micro HDMI Plug

$9.95

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab an HDMI ribbon cable, then swap and switch any of our HDMI adapters on each end using the flex cable clips...

Add to Cart