Categories - PiShop.ca

Sub Categories

Power your Pi with a wide range of (DC) input voltages from 3 to 16V! Wide Input SHIM lets you use a range of different DC power supplies with your Pi, including the ubiquitous 12V barrel jack power supplies. It's super-skinny, so you can solder it...

Add to Cart

Mini Basic PIR Sensor - BL412

$3.45

PIR sensors are used to detect motion from pets/humanoids from about 5 meters away (possibly works on zombies, not guaranteed). This sensor is much smaller than most PIR modules, which makes it great for unobtrusive projects. It's also fully-contained -...

Add to Cart

STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long

$1.95

This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This...

Add to Cart

Panel Mount 100K potentiometer (Breadboard Friendly) - 100KB

$1.45

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 100K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one...

Add to Cart

enviro:bit micro:bit Kit - v1.5

$49.95 $62.95

CLEARANCE! This kit contains the previous version of micro:bit V1.5 Make a friendly weather station to sit on your windowsill, that keeps track of temperature, pressure, humidity, light and colour, and sound. A perfect way to introduce kids to sensors...

Notify Me

3 x AAA Battery Holder with On/Off Switch and 2-Pin JST

$2.95

This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have...

Add to Cart

Elecfreaks micro:bit Crystal Battery Holder (2x AAA)

$2.45

This is a battery box specialized for micro:bit. You can place two AAA batteries into the battery holder, switch on and then it will supply power to micro:bit via PH2.0 connector. Includes 1x Exclusive Crystal Battery Box

Add to Cart

Omnivise PCB Holder

$89.95

The Hakko C1390C Omnivise holds boards easily, safely, and securely. The unique design allows 360° use and can adjust to five different height settings. Can accommodate any board size. The Omnivise was designed to hold printed circuit boards level...

Add to Cart

Badger 2040 W (Pico W Aboard) + Accessory Kit

$55.95

A programmable badge with fast updating E Ink® display and wireless connectivity, powered by Raspberry Pi Pico W. Badger 2040 W is a maker-friendly all-in-one badge wearable, designed for efficient identification of humans and other lifeforms. It's...

Add to Cart

Badger 2040 W (Pico W Aboard)

$46.95

Badger 2040 W (Pico W Aboard) – Badger W Only - A programmable badge with fast updating E Ink® display and wireless connectivity, powered by Raspberry Pi Pico W Badger 2040 W is a maker-friendly all-in-one badge wearable, designed for...

Choose Options

SparkFun 4-in-1 Multi-USB Cable - USB-A Host

$14.95

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The SparkFun 4-in-1 Multi-USB Cable. The SparkFun 4-in-1...

Add to Cart

4-in-1 Multi-USB Cable - USB-C Host

$13.95

Add to Cart

Latching 5-Compartment Storage Box

$3.95

Storing your components in old Adafruit shipping boxes is a fine way to keep organized, but our black boxes make it hard to know what's inside! Well now you'll always be organized with this transparent plastic 5-Part Storage Box! We love this...

Add to Cart

Circuit Playground Express

$38.95

Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. Adafruit has taken the original Circuit Playground Classic and made it even better! Not only did we pack even more sensors in, they also made it...

Add to Cart

Adafruit Perma-Proto Quarter-sized Breadboard PCB - 3 Pack!

$13.95

Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: it's always crummy quality, with pads that flake off and no labeling. Then we thought about how people actually prototype - usually starting with a...

Add to Cart

Panel Mount Kit for Raspberry Pi Camera Module 3

$6.95

The camera module is NOT included Specifications Material: 3mm perspex Colour: Black Dimensions: Mounting plate: 55mm x 45mm Camera mounting holes: M2 Mounting plate mounting holes: M3 Compatible with: Camera Module 3 (may be compatible...

Add to Cart

Keybow 2040 - Clicky Keys

$69.95

Keybow 2040 - Clicky Keys - PIM565 - A luxe all-in-one 16 key mini mechanical keyboard with hot swap clicky or linear switches and per key customizable RGB lighting. A USB-C cable is NOT included Keybow evolves into its final form with a 4x4 grid...

Add to Cart

Motor SHIM for Pico

$14.95

This neat little add-on board lets you drive two micro metal gearmotors from a Raspberry Pi Pico - tiny robots ahoy! Raspberry Pi Pico, headers and other components are NOT included Solder this SHIM to the back of your Pico and unlock the magical...

Add to Cart

Pico Decker (Quad Expander)

$18.95

Quadruplicate your GPIO pins and attach up to four add-ons to a single Raspberry Pi Pico with our formidable Pico Decker expander board! A Raspberry Pi Pico is NOT included Struggling to choose between Pico add-ons? Mix and match up an epic stack of...

Add to Cart

MSA301 3DoF Motion Sensor Breakout

$8.95

A simple 3 Degrees of Freedom accelerometer breakout that measures acceleration in three axes - X, Y, and Z. If you need simple and reliable motion detection for your project, then this is a great choice! This accelerometer has a few nifty features...

Notify Me