FX-888DX Soldering Station, Classic Blue/Yellow, FX888DX-010BYFeatures Adjustable temperature control dial, range: 120° - 899°F Digital display shows °F or °C Ceramic heating element and sensor Slender, lightweight ergonomic...

Hakko - FX-901 Cordless Soldering Iron - FX-901/PFeatures ON / OFF switch Quick-change composite tip Maintains soldering temperature of 600° F Separate battery magazine for easy replacement of batteries Long-life battery power: Alkaline...

Hakko ESD Grey Rubber Mat 24 x 16in - SC-1003/P Made from all natural rubber with a conductive bottom layer and dissipative top layer. Surface is a smooth, mat surface that is easy to clean and reduces glare, and features a non-skid backing. The...

A protective cap for the HAKKO FX-600/601 soldering irons. NOTE: While the plastic is heat resistant, it is not intended to be used as a holder or installed while the soldering iron is on. Heat from the soldering iron will cause the cap to increase in...

This tip is used with the following Hakko Soldering Stations and Systems: Hakko FX-888 Soldering Station Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System) Hakko 907 Soldering Iron Hakko 907-ESD Soldering Iron Hakko 900M...

The Hakko 611 solder reel stand keeps your bench neat by smoothly drawing solder wire as you need. Dual reels offers the flexibility to use different solder wire or share with another operator.Increase work efficiency and organize your bench with Hakko...

Hakko Iron Cover 605M - One piece The 605M iron cover provides heat resistance and thermal insulation for your soldering iron, allowing you to place it back into your tool box immediately after use. No need to wait for the iron to cool down first. Fits...

The Hakko PD-03-D manual desoldering tool provides a low cost and effective method for removal of residual solder during desoldering operations. With the press of a button, the spring activated vacuum system sucks the molten solder into the collection...

TIP POLISHING PASTE The Hakko FS-100 paste re-tins oxidized soldering iron tips and is 100% Lead-Free. The flux does not contain Diammonium phosphate and does not leave a corrosive residue. (Conforms to JIS-Z-3197 6.6.1 test method.) Depending on the...

SOLDERING IRON HOLDER with 599B TIP CLEANER - 633-01 Mount your HAKKO 900-series iron in the slick 633-01 holder and blast oxidation away with the onboard 599B brass-coil cleaner—no sponge, no fuss. Built tough with a heat-resistant base and...

HAKKO FX600-05/P - FX‐600 Soldering Iron A lightweight portable soldering iron with a lock out temperature key. A perfect 74W iron for the DIY hobbyist that uses T18 tips. Over 30 different tip shapes at a temperature range from 400°-932°F.Level...

Features T31 Series Composite Tip This tip is used with the Hakko FX-100 Induction Heat Soldering System Use with the Hakko FX1001-51 soldering iron. Temperature: 750°F (400°C) Specifications Reference  T31 and T35 Series Tip...

A special high efficiency filter for the Hakko 493 Smoke Absorber & Hakko FA-400 Smoke Absorber.Removes up to 90% of airborne particles — the exhaust air is actually cleaner than the room air! NOTE When using the...

Hakko A1559 Sponge for FX-888D 

Features Made with urethane foam with refined, active, high absorption carbon. 5 pack Specifications Part Number A1001 Size (W x H x D) 130 x 130 x 10mm (5.1 x 5.1 x 0.4 in.) Weight (New) 12 g (0.03 lb.) Max Absorbing Wt...

The Hakko FA-400 bench top smoke absorber is a quick, safe, and efficient way to absorb soldering smoke and fumes. Optional high efficient filters are available and all filters are easily replaceable. Features Can be used in a vertical (standing up)...

Features Economical Lightweight design Ideal for circuit boards, small electric parts, connectors and wiring connections Specifications  Handpiece    Model Name  RED 503  Part No...

The Hakko 599B Tip Cleaner is the ideal cleaning companion for all your soldering tools. The curly brass wire is tough enough to scrub residual solder from your soldering tools without your soldering iron becoming cool. The 599B is the perfect...

This tip is used with the following Hakko Soldering Stations and Systems: Hakko FX-888 Soldering Station Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System) Hakko 907 Soldering Iron Hakko 907-ESD Soldering Iron Hakko 900M...

The Hakko 599B Tip Cleaner is the ideal cleaning alternative to the traditional wet sponge. The non-abrasive brass shavings is tough enough to scrub residual solder from your soldering tools without your soldering iron becoming cool.