Features This case just has top and bottom boards, so you can access the Raspberry Pi from all sides There is a cooling fan for each layer The acrylic material won't block the Wi-Fi and Bluetooth signal You can stack many layers on it, suitable for...

The UniPiCase is a secure, feature-rich case made to the best design and fabrication standards. This is our own case design, and it is manufactured here in Canada! This one is of many possible variations of this case. The UniPiCase ZW is incredibly...

Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane material with an adhesive backing (just remove the paper) so you can attach it to nearly...

Clearance: Compatible with micro:bit V1 only! Caution! The BBC micro:bit and MI:power board (required) are NOT included. This is the CLEAR version of this case. This case has been designed to protect a BBC micro:bit with...

Machine learning has come to the 'edge' - small microcontrollers that can run a very miniature version of TensorFlow Lite to do ML computations. But you don't need super complex hardware to start developing your own TensorFlow models! We've adapted our...

The Select Series DisplayPort to DisplayPort 1.2a Cable allows you to connect your DisplayPort 1.2 enabled computer to a monitor or other DisplayPort ready device. The locking connectors ensure a secure connection to your display. The DisplayPort 1.2...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab an HDMI ribbon cable, then swap and switch any of our HDMI adapters on each end using the flex cable clips...

This is a 25 Pack of 1K Ω Resistors. 1k Ohm, 1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards.

This alcohol gas sensor detects the concentration of alcohol gas in the air and ouputs its reading as an analog voltage. The concentration sensing range of 0.04 mg/L to 4 mg/L is suitable for breathalysers (the legal limit of breath alcohol...

Use this antenna to improve your WLAN or Zigbee signal strength. The RP-SMA connector and pivoting design make it easy to attach and orient. Specifications: Frequency Range: 2.4GHz ~ 2.5GHz Antenna Type: Whip, Tilt Number of Bands:  1 VSWR: 1...

Compatible Models CR-8S Ender-3S Ender-3 Ender-3 pro Creality SKU: 3005040007, 6004060003

These are very interesting 5mm diffused RGB LEDs - instead of having 4 pins to control 3 LEDs, they have only two leads - power and ground. When powered, the LEDs perform a slow fade through the rainbow, from red to orange to yellow, etc till they get...

An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 28 pin 0.6" wide version. Best used with chips that have 28 pins (2x14) and have 0.6" pin spacing. We also have 0...

Waveshare 20869 - RPi FPC Camera (B) For Raspberry Pi, OV5647, 5MP, Mini Size 5MP Mini Size Camera Module Compatible with Raspberry Pi series boards - Pi 4B / 3A+ / 3B+ / 3B / B+ / A+, and CM3/3+/4 (extra adapter board required for CMs) More Clear...

Creality SKU: 6004110003 Strong wind force and low power consumption Wide compatibility with all Creality 3D printers Compatible Model CR-6 SE

USB Type-C to USB 2.0 Micro-B Adapter

This gearmotor is a miniature high-power, 6 V brushed DC motor with a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Key...

This 6mm 3MP Lens is compatible with the Raspberry Pi HQ camera. Thanks to its manual iris and the special optics construction, sharp focus is achievable at a 30cm focal distance and higher with this lens. FEATURES Incredible depth of field - Most of...

5-10V drive voltage Electronic Kitchen Scale Sensor Module 5kg Product Description Four-lead, easy to use, plus 5-10V drive voltage, the force applied changes to a voltage signal output directly. Dimensions: 12.7mm * 12.7mm * 75mm One end of the...