These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes...

This breakout board for STMicro’s STSPIN220 low-voltage microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and operates from 1.8 V to 10 V, allowing stepper motors to be powered with voltages that are too...

Nothing makes a project harder to maintain than a lot of loose wiring. That's why we like to use terminal blocks whenever making PCB-to-Wire connections. These particular 3.5mm terminal blocks are our favorite: big enough for a range of wire gauges, easy...

Connect your prototype circuit to the Arduino easily with this simple to use Arduino shield. It includes a mini-breadboard with self-adhesive backing so you can stick this onto the shield and use it directly. Alternatively you can solder your components...

This adapter converts an HDMI signal for display on a VGA monitor Convert digital HDMI to analog VGA + Audio with this adapter. Perfect for Raspberry Pi, PC, and laptop. Features: Product resolution up to 720P/ 1080i/ 1080P Product output audio...

This is a multimedia remote for any PC or Raspberry Pi. It works through infra-red with an infra-red receiver (up to 18 meters of range) that is plugged into one of the Pi's USB ports. What makes this remote special is that it looks like a standard TV...

MKR ZERO has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware! Watch out music makers, Arduino has released two libraries for your enjoyment: Arduino Sound library - a...

This is a lone infra-red sensor for use with an Arduino or Raspberry Pi. It can be used to decode infra-red signals from remote controls such as a TV remote or some RC vehicle remotes. It is especially designed to be reliable and easy to use with...

Raspberry Pi 3 GPIO Extension Board For Raspberry Pi 2/3 Model Board Version 2.1 26 pin    

With its discrete cooling vents, this functional and attractive case will complement any Raspberry Pi 4. Features Stunning design  Cooling vents on the top of the case that work perfectly with the PoE HAT and the Pimoroni Fan...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable...

This is hot! Literally! Apply 5-12VDC and the stainless steel fibers in this heating fabric will warm up, creating a little heating pad. On one hand, it's just a gigantic resistor. On the other hand, it's flexible, light, and can be wrapped around a...

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on...

ESP-201 ESP8266 Serial Port Module Send Receive IO Lead Out WIFI Wireless Product Description 1.Can be used as the IO module. 2.All IO lead out. 3.With antenna, farther than others. 4.IPX interface on board. 5.Low consumption, and more...

Features Convert the HDMI output port to an analog VGA DB-15 connector with this adapter Supports full-size high-definition resolution of 720p or 1080p Can be used with all HDMI output port and VGA input device Connect a VGA display to an HDMI...

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket. Each shell comes with a two-part snap plastic shell and a proper...

Adafruit 2895 - Non-Latching Mini Relay FeatherWing A Feather board without ambition is a Feather board without FeatherWings! This is the Non-Latching Mini Relay FeatherWing. It gives you power to control, and control over power. Put simply,...

If you're looking to make a custom cable with any two of Adafruit's HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables, then swap and switch any of the...

Audio Video Capture Cards HDMI to USB HDMI Video Capture, Full HD 1080P USB 2.0 Record via DSLR Camcorder Action Cam, Facebook Portal TV Recorder, Game Streaming, Teaching, Live Broadcasting Plug and Play---Easy to use, NO driver required, easily...

Connect your computer, monitor, power adapter, or other device with a male IEC 60320 C14 panel connector to a standard US AC wall outlet using this cable. This cable features a standard, ground NEMA 5-15P plug on one end and an IEC 60320 C13 connector on...