Length: 15 cm or 6 inches approximately

Length 3ft

Length 2ft

Length 6in

This cable is a little unusual, rather than having a USB A plug on one end, it has two Micro B USB connections! What is this for? It's for when you have a "USB On-The-Go (OTG)" device, and you want to plug in another USB device. For example, a Pi Zero or...

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat Noodle Cable - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat "noodle" cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

This handy USB extension cable will make it easy for you to enclose a device that has a mini-B USB type port. This would be most handy when putting a Teensy, FTDI friend, USB LiPo charger, USB Boarduino, etc into a box! The jack half has two mounting...

We think this USB-A to micro-USB B cable is the perfect length, at 45cm/1.5ft. Black in color. This cable is male USB(A) to male micro-USB(B), USB 2.0. Compatible with micro:bit, Raspberry Pi (up to Pi 3B+) and many Arduino boards.

25cm 90 Degree Right Angled USB 2.0 A Male Connector to Female Extension Cable With Panel Mount Hole Length: 25cm USB-A Male: 90 Degrees up  Direction Angled  type USB-A Female: With Panel Mount Hole  

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket. Each shell comes with a two-part snap plastic shell and a proper...

Right Angle USB cable - A/MicroB This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right angle bend. We thought this might make a...

Check out this handy MicroUSB extension cable, which will make it easy for you to enclose a device that has a B type (micro USB host) port. Great if you need to extend the USB port for your Raspberry Pi, Arduino, Feather or really anything...

The USB OTG Host Cable – MicroB OTG male to A female lets you plug full-size USB devices (like keyboards, mice, flash drives) into devices with a Micro-B OTG port. It’s passive, so it only carries data and power. Works...

5V 2A USB power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone or anything else that's power hungry! This adapter was specifically designed to provide 5.25V not 5V, but we still call it a 5V USB adapter...