Length 6in

2.54mm (0.1") female header with 20 cm or ~7.8 inches cable for connecting switches and other peripherals to devices such as Tiny-UPS, Pi-UpTime-UPS, PiZ-UpTime or other devices. Specifications Single 1×2 female connector, 2.54 mm or 100 mil...

Micro HDMI Male to HDMI Female Adapter Cable Note: Does NOT support HDMI CEC.

This 6 ft cable connects from microHDMI to full sized HDMI. It's a perfect fit for the Raspberry Pi 4, which features microHDMI ports.

If you're looking to make a custom cable with any two of our USB or HDMI adapters, then you'll need to have these flex cables handy! Making custom cables has never been easier. Just grab one of these cables, then swap and switch any of the plug or...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable...

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable...

Heat shrink is the duct tape of electronics which I guess makes this heat shrink the colorful and exciting duct tape they sell at craft stores. This heat shrink comes in six different colors - red, blue, green, yellow, white and the traditional...

This cable is a little unusual, rather than having a USB A plug on one end, it has two Micro B USB connections! What is this for? It's for when you have a "USB On-The-Go (OTG)" device, and you want to plug in another USB device. For example, a Pi Zero or...

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat Noodle Cable - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat €œnoodle€ cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

USB flat "noodle" cables - a standard A to micro-B USB cable, for USB 1.1 or 2.0 - but in a slim profile. Approximately 3 feet / 1 meter long. 26 AWG power wires, 28 AWG data wires.

A handy little cable that connects to the JST connector on the underside of HyperPixel 4.0, allowing you to use I2C devices with your Raspberry Pi at the same time as the display. This 30cm-long cable plugs into the I2C connector on HyperPixel...

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables, then swap and switch any of the HDMI...

This handy USB extension cable will make it easy for you to enclose a device that has a mini-B USB type port. This would be most handy when putting a Teensy, FTDI friend, USB LiPo charger, USB Boarduino, etc into a box! The jack half has two mounting...