Replacement Grey For SFC Console Female 7 Pin Connector Socket for SNES Controller $0.95 $1.95 Replacement Grey For SFC Console 7 Pin Connector Socket for SNES Controller Add to Cart
USB-C/PWR Splitter $3.95 The adaptor allows the Raspberry Pi 4 to be used with a Pi USB-C power supply (or DC barrel jack) whilst allowing access to USB 2 OTG data over a separate USB-C connection (USB3 data is not connected/passed through). USB Type-C (DATA POWER) <> USB... Add to Cart
USB Adaptor Kit $12.95 The kit contains the following connector boards and pin headers. QtyTypeGender 2 Micro USB Male 2 Micro USB Female 2 USB Type-A Male 2 USB Type-A Female 4 - 6way long pin header Of the 6 pins on the connector boards two are used for 5V... Add to Cart
USB/PWR Splitter $3.95 The adaptor allows the Raspberry Pi 4 to be used with a Pi Micro USB power supply (or DC barrel jack) whilst allowing access to the OTG USB. USB Type-A (data and power) <> USB Data (Micro USB) and Power (Micro USB/Barrel jack). USB Type AMicro... Notify Me
Male to Female GPIO Ribbon Cable $4.95 SPECIFICATIONS Rainbow flat cable: IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable Length: about 20 cm / 8 inch Material: High-quantity copper soft wire material for safe and durable Easy assembly:The cables can be separated to form an... Add to Cart
Industrial USB TO TTL Converter, Original FT232RL, Multi Protection & Systems Support $11.95 Waveshare 17939 - Industrial USB TO TTL Converter, Original FT232RL Onboard, Multi Protection Circuits, Multi Systems Support USB signal & Pinouts Definition 5V 5V output VCC 3.3V or 5V output, configured by... Add to Cart
USB to TTL 4-pin Wire $11.95 USB To TTL, With Embedded Convertor - NOT COMPATIBLE WITH WINDOWS 11 USB to TTL 4-pin Wire specification: Embedded convertor: PL2303 Supports windows XP/7/8/8.1/10/... Connector: USB Type-A plug, 4-pin 2.54mm pinheader Pinout: Red - VCC... Add to Cart
PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp $14.95 Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal... Add to Cart
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long $1.95 This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and... Add to Cart
USB Type-C to USB 3.0 A Female Adapter $3.95 USB 3.0 SuperSpeed adapters are a great way to quickly change the connection type or gender of an existing USB cable. This adapter has USB Type C Male opposite USB 3.0 Type A Female. Features Connector A: USB Type C Male Connector B: USB... Add to Cart
Micro-HDMI to HDMI cable for Pi 4, 3ft, Black $5.95 This 3 ft cable connects from microHDMI to full sized HDMI. It's a perfect fit for the Raspberry Pi 4, which features microHDMI ports. Add to Cart
Cat6 Ethernet Network Patch Cable RJ45 - 3ft $1.75 Cat6 Ethernet Network Patch Cable RJ45 - 3ft Add to Cart
Solderless Serial to USB adapter for Raspberry Pi Zero $12.95 Caution! This product is NOT compatible with the new Raspberry Pi Zero W 2 Using solderless pins the adapter slides onto the back of a Pi Zero GPIO (If a permanent connection is required the adapter can still be soldered to the GPIO header). The adapter... Add to Cart
USB Power Switch $4.95 Enables power to a USB device to be turned on/off via a USB power switch (MOSFET). Configuration Supplied with the PD (pull down) resistor set (Normally off). Connectors on top for GND / EN / 5V When the EN pin is connected to >2V (5V max) power to... Notify Me
USB CDC Serial Adaptor (3.3v) $6.45 USB Serial Adaptor Plugs directly onto our Cluster HAT and MMC (SD) HAT to provide serial console access to the Raspberry Pi for quick access. Using jumper wires it can be used to access the serial on a Raspberry Pi and for Arduino programming (using RTS... Add to Cart
USB Console Stub - Serial adaptor for Raspberry Pi $6.45 USB to (3.3v) Serial adaptor for use with the Raspberry Pi with a pinout designed to plug straight onto Pi GPIO pins (26 or 40 pin). Its a low cost no fuss adaptor which uses built-in USB-CDC drivers on most modern operating systems (Win10/Linux/Mac OS... Add to Cart