Explore the complexities of sound & noise with the Noise Pack add-on for the Inventors Kit for BBC micro:bit. Learn how to make Instruments, Amplifiers, & EQs! Learn how to bend sound to your will with the Noise Pack add-on for the Kitronik...

The :CREATE Proto Board for BBC microbit is an electronics prototyping system that allows for both through hole and SMT component types in the same circuits. Create prototype circuits using surface mount and/or conventional components with the :CREATE...

With this, the latest version of Bulldozer add-on for :MOVE mini MK2 for the BBC microbit, everyone's favourite little programmable robot buggy just got much better. Robots often do more than just :MOVE from A to B, and with this add-on so can :MOVE...

Add real-time clock and environment sensing (pressure, temperature, & humidity) capabilities to the micro:bit with the Kitronik RTC Board. MakeCode compatible. This RTC & Klimate board is a Real Time Clock (RTC) and environmental sensor (BME280)...

This edge Connector/Header for the BBC micro:bit gives access to all important pins on the bottom edge of the microbit allowing for custom prototyping systems. Looking to do more with your BBC micro:bit? Unlock its potential with this Edge...

Explore codable lighting with this ZIP LED add-on for the Kitronik Inventors kit for the BBC microbit and learn ways in which LEDs might improve your projects. This add-on pack for the Kitronik Inventors Kit for the BBC microbit provides the perfect way...

A 3V Light Emitting Diode as an additional LED. It uses a high brightness low current LED and includes a current limiting resistor to protect the micro:bit’s output. The black lead goes on to GND and the green lead goes on to whichever Pin 0, 1...

A transistor that will allow other items to be switched where the micro:bit would not be able to. Items such as motors, larger speakers, relays and so forth, up to 1A total load. A current limiting resistor is in the circuit to protect the micro:bit...

A simple buzzer with transistor that can be powered by the micro:bit. Costs more than a headphone adapter but far less than the mini-speaker - its best use is to act as an sounder for an alarm or similar.

A small version of the PIR that is used in a typical burglar alarm. It triggers when a warm body passes in front of the detector. It has some range / sensitivity setting capability and the duration of the output can be set. The black lead goes on to...

A small microphone with amplifier & threshold setting. It can detect when sound reaches a certain level. It can not detect a particular frequency and there is no support in the micro:bit programming environment at present for it to analyse...

A type of buzzer - it has to be driven by a pulsed output. It's tuned for around 2kHz when it will be at its loudest but will produce a tone across a wide range of frequencies. In the Block Editor, the black lead goes on to GND and the blue lead goes on...

Good for detecting boxes, drawers or doors being opened and much more. The black lead goes on GND, the red lead goes on 3v and the other lead goes on 0, 1, or 2. This item is somewhat polarity sensitive, the red & black leads need...

A very accurate temperature sensor using a calibrated chip called a TMP36GZ. It is accurate to ±1°C at +25°C. At this temperature it outputs 750mV. It changes by 10mV per °C. The black lead goes on GND, the red lead...

An external light sensor for all your light sensing needs. The black lead goes on GND, the red lead goes on 3v and the other lead goes on 0, 1, or 2.This item is polarity sensitive, the red & black leads need to be on the correct...

This Pushbutton makes it easy to add an extra input to your BBC micro:bit projects. With simple clip leads and no soldering required, it’s perfect for classrooms, workshops, and quick prototyping. Features Simple connectivity — attach...

Provides a variable voltage to an analog input via a twist knob - a volume control if you will. Can be used for any application where a user input across an analog range is required - for instance changing the frequency of the music output or the speed...

The Water Sensor Provides a variable analog reading depending on how wet/damp the sensor is. Good for plants or fingers. The black lead goes on GND, the red lead goes on 3v and the blue lead goes on whichever pin is being used in the program. This...

Add line following to your micro:bit buggy/robots with the compact Kitronik :Move Line Following Board for BBC micro:bit, also fully compatible with :MOVE mini. Add line following to your BBC microbit Robot/buggy projects with the :Move Line...

Dupont 5 way Female to Female interface cable for the Kitronik Line Following Add On For :MOVE mini kit. It is also suitable for breadboards with 2.54mm pitch. This standard Dupont interface cable is the cable used in the Kitronik Line Following Add...