Categories - PiShop.ca

Sub Categories

Flex Cable for Raspberry Pi Camera - 100mm / 4"

$2.65

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. This cable is 100mm long...

Add to Cart

Replacement Grey For SFC Console Female 7 Pin Connector Socket for SNES Controller

$0.95 $1.95

Replacement Grey For SFC Console 7 Pin Connector Socket for SNES Controller

Notify Me

IQaudio Codec Zero

$27.95

Raspberry Pi/IQaudio Codec Zero is a Raspberry Pi Zero-sized audio I/O HAT. It delivers bi-directional digital audio signals (I2S) between Raspberry Pi Zero and its onboard Dialog Semiconductor DA7212 codec. Codec Zero supports a range of input and...

Add to Cart

Vibration Sensor Module

$1.99

This unit is great for detecting vibration on for your project! Super simple to interface with Arduino microcontrollers, please make sure to connect Vcc and GND correctly on the device or you may burn the unit. Use the potentiometer onboard to adjust the...

Add to Cart

Active Buzzer Module for 5v Microcontrollers

$3.95

This device is compatible with any 5v microcontroller. The buzzer can be installed as an alarm for any system you want and only requires three wires to get this unit up and running. When holding the board with the pins facing towards you, the left most...

Add to Cart

Breadboard Wiring Kit

$8.45

This economy breadboard wiring kit contains 140 pcs of cut and preformed jumper wires in a plastic reusable storage box. These wiring kits are ideal for use with any breadboard. Each jumper has stripped ends and preformed right-angled leads for easy...

Add to Cart

Adafruit MagTag Starter Kit - 2.9" Grayscale E-Ink WiFi Display

$68.95

The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power is removed! The ESP32-S2 is great because it builds on the years...

Notify Me

HiFiBerry DAC2 Pro

$68.95

Compatible with: Raspberry Pi A+/B+/2B/3B/3B+/4B+/Zero This is HiFiBerry DAC2 Pro with a pair of gold-plated RCA jacks. It can be simply plugged onto your Raspberry Pi, without any soldering. HiFiBerry DAC2 Pro is the sucessor of your popular DAC+ Pro...

Notify Me

Adafruit QT Py - SAMD21 Dev Board with STEMMA QT

$12.45

What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with our favorite lil chip, the SAMD21 (as made famous in our GEMMA M0 and Trinket M0 boards). This time it comes with our favorite connector - the STEMMA QT, a chainable I2C...

Add to Cart

USB-C/PWR Splitter

$3.95

The adaptor allows the Raspberry Pi 4 to be used with a Pi USB-C power supply (or DC barrel jack) whilst allowing access to USB 2 OTG data over a separate USB-C connection (USB3 data is not connected/passed through). USB Type-C (DATA POWER) <> USB...

Add to Cart

APlusCam

$5.95

Pi (3A+/etc), camera, camera cable, PSU are not included. What is it? APlusCam is designed in the shape of a Raspberry Pi HAT with mounting holes for a Raspberry Pi Camera and suction cups allowing the camera can look out through a window. The...

Add to Cart

USB Adaptor Kit

$12.95

The kit contains the following connector boards and pin headers. QtyTypeGender 2 Micro USB Male 2 Micro USB Female 2 USB Type-A Male 2 USB Type-A Female 4 - 6way long pin header Of the 6 pins on the...

Add to Cart

USB/PWR Splitter

$3.95

The adaptor allows the Raspberry Pi 4 to be used with a Pi Micro USB power supply (or DC barrel jack) whilst allowing access to the OTG USB. USB Type-A (data and power) <> USB Data (Micro USB) and Power (Micro USB/Barrel jack). USB Type AMicro...

Add to Cart

ClusterCTRL Stack

$69.95 $125.95

The ClusterCTRL Stack (controller and passive backplane) is a simple way to both power and control cooling for a stack of 5 Raspberry Pi. Controller Powered by 12-24V PSU (not included). 20 pin header for Power (2x5V and 2xGND for each Pi). 6 pin...

Add to Cart

4G / 3G / 2G / GSM / GPRS / GNSS HAT for Raspberry Pi, LTE CAT4, the Global Version

$105.95

Waveshare 17372 - 4G/3G/2G/GSM/GPRS/GNSS HAT For Raspberry Pi, Based On SIM7600G-H The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty...

Add to Cart

Case Fan & Heatsink for Raspberry Pi 4 Case

$6.95

Works with Raspberry Pi 4 and the official Raspberry Pi 4 Case. Designed for overclockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. Features Fits perfectly into the lid of the...

Add to Cart

IQaudio DAC Pro

$34.95

We have two enclosures compatible with this HAT: HighPi Pro Case for IQAudio DAC+ and Raspberry Pi 3 for Raspberry Pi 3, and HighPi Pro Case for IQAudio DAC+ and Raspberry Pi 4 for Raspberry Pi 4. The Pi-DAC PRO, a new breed of...

Choose Options

IQaudio DAC+

$27.95

Choose Options

IQaudio DigiAMP+

$40.95

IQaudio DigiAMP+ IQaudio DigiAMP+ uses the Texas Instruments TAS5756M PowerDAC to deliver direct connection to PASSIVE stereo speakers at up to 2x35wpc with variable output. Ideal for a Raspberry Pi-based hi-fi system. Getting started IQaudio DigiAMP+...

Choose Options

ProtoDock

$18.45

The ProtoDock is an all-in-one desktop prototyping dock for your Raspberry Pi 4, Raspberry Pi 3 or any other 40-pin Model B Raspberry Pi! Similar to its little brother the ZeroDock, the ProtoDock keeps your desk tidy and all of your vital...

Add to Cart